Troubleshooting - JVC KD-SH1000 Instruction Manual

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• "Connect Error" appears on the display.
• "Push Reset" appears on the display and the
control panel movement is freezed.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Disc can be neither played back nor ejected.
• Disc cannot be recognized ("No Disc," "Loading
Error," or "Eject Error" appears).
• Disc sound is sometimes interrupted.
32
All manuals and user guides at all-guides.com
Symptoms Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 2).
Remove the control panel, wipe the connector, then attach
it again (see pages 4 and 26).
Reset the unit (see page 2). If this does not work, check the
installation.
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which you
used for recording.
• Unlock the disc (see page 14).
• Eject the disc forcibly (see page 2).
Eject the disc forcibly (see page 2).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.