Table of Contents
Advertisement
KD-T915BTS / KD-T910BTS / KD-TD91BTS / KD-T91MBS/
KD-T711BT / KD-T710BT / KD-TD71BT / KD-SR86BT
CD RECEIVER
INSTRUCTION MANUAL
RÉCEPTEUR CD
MANUEL D'INSTRUCTIONS
RECEPTOR CON CD
MANUAL DE INSTRUCCIONES
For customer Use:
Enter below the Model No. and Serial No. which are
located on the top or bottom of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
ENGLISH
FRANÇAIS
ESPAÑOL
B5A-3092-00 [K]
Advertisement
Table of Contents
Related Manuals for JVC KD-T915BTS
Summary of Contents for JVC KD-T915BTS
- Page 1 ENGLISH FRANÇAIS ESPAÑOL KD-T915BTS / KD-T910BTS / KD-TD91BTS / KD-T91MBS/ KD-T711BT / KD-T710BT / KD-TD71BT / KD-SR86BT CD RECEIVER INSTRUCTION MANUAL RÉCEPTEUR CD MANUEL D’INSTRUCTIONS RECEPTOR CON CD MANUAL DE INSTRUCCIONES For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
- Page 2 útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Products: CD RECEIVER adecuado a estos productos y a sus subproductos residuales correspondientes. Model Name: KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS/KD-T711BT/ Póngase en contacto con su administración local para obtener información sobre el KD-T710BT/KD-TD71BT/KD-SR86BT punto de recogida más cercano.
- Page 3 SOFTWARE LICENSE AGREEMENT IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is conditions: copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions 1.
- Page 4 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
- Page 5 Important Notice concerning the Software -CMP The MIT License (MIT) -jansson Copyright (c) 2014 Charles Gunyon Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without documentation files (the "Software"), to deal in the Software without restriction, including without...
-
Page 6: Table Of Contents
Bluetooth® ....................20 • Operations are explained mainly using buttons on the faceplate of KD-T915BTS. Bluetooth - Connection • English indications are used for the purpose of explanation. You can Bluetooth - Mobile phone select the display language from the menu. -
Page 7: Before Use
Before Use IMPORTANT • If a disc error occurs due to condensation on the laser lens, eject the disc and wait for the moisture to evaporate. • To ensure proper use, please read through this manual before using this • Depending on the types of cars, the antenna will automatically extend product. -
Page 8: Basics
Basics Faceplate Attach KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS: Volume knob Loading slot Display window* Detach KD-T915BTS: Detach button USB cable from the rear of the unit How to reset KD-T711BT/KD-T710BT/KD-TD71BT/KD-SR86BT: Reset the unit within 5 seconds after detaching the faceplate. KD-T711BT: * Only for illustration purpose. -
Page 9: Getting Started
Getting Started Basics Remote control (RM-RK52) (supplied for KD-T711BT) • For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS/KD-T710BT/ KD-TD71BT: This unit can be remotely controlled with an optionally purchased remote control. • For KD-SR86BT: Remote control functions are not available. Remote sensor (Do not expose to bright sunlight.) -
Page 10: Set The Basic Settings
Turn the volume knob to select an item (see the following table), then activated). press the knob. For details on how to update the firmware, visit <http://www.jvc.net/cs/car/>. Repeat step 2 until the desired item is selected or activated. Press to exit. -
Page 11: Radio
[TUNER SETTING] (except for KD-T711BT) You can store up to 18 stations for FM and 6 stations for AM. [RADIO TIMER] (For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS) Turns on the radio at a specific time regardless of the current source. Store a station 1 [ONCE]/[DAILY]/[WEEKLY]/[OFF]: Select how often the timer will be turned on. - Page 12 Radio Default: [XX] [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18 stations for FM. “SSM” stops flashing when the first 6 stations are stored. [TUNER SETTING] (for KD-T711BT) Select [SSM 07–12]/[SSM 13–18] to store the following 12 stations. [SSM] [SSM 01–06]/[SSM 07–12]/[SSM 13–18]: Automatically presets up to 18 [IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from stations for FM.
-
Page 13: Cd/Usb/Ipod
USB 2.0 cable* (commercially available) USB device and/or KD-T915BTS: You can also connect to the USB cable from the rear of the unit (USB input terminal). The source changes to USB FRONT/USB REAR/USB automatically and playback starts. * Do not leave the cable inside the car when not in use. - Page 14 *1 For CD: Only for MP3/WMA/AAC files. This does not work for iPod. *2 For iPod: Applicable only when [HEAD MODE] is selected. (Page 11) Selectable source: • KD-T915BTS: CD/USB FRONT/USB REAR/iPod FRONT/iPod REAR or iPod BT • KD-T910BTS/KD-TD91BTS/KD-T91MBS/KD-T711BT/KD-T710BT/ KD-TD71BT/KD-SR86BT:...
- Page 15 CD/USB/iPod Quick search (applicable only for CD source and USB FRONT/USB REAR/USB Select music drive source) While in USB FRONT/USB REAR/USB source, press 5 MODE repeatedly. If you have many files, you can search through them quickly. Stored songs in the following drive will be played back. Press •...
-
Page 16: Aux
Press B SRC repeatedly to select AUX. and/or Turn on the portable audio player and start playback. KD-T915BTS: You can also connect to the USB cable from the rear of the unit (USB input terminal). Use a 3-core plug head stereo mini plug for optimum audio You can also connect the iPhone/iPod touch or Android device via output. - Page 17 Pandora® (except for KD-T711BT) Bookmark current song information On the faceplate On the remote control Press d. Play back/pause Press the volume knob. Press and hold the volume knob. “BOOKMARKED” appears and the information is stored to your device. Press T. Press I.
-
Page 18: Spotify
*3 Available for tracks in Playlists only. and/or Save favorite song information KD-T915BTS: You can also connect to the USB cable from the rear of the unit (USB input terminal). While listening to the Radio on Spotify... Press and hold the volume knob. -
Page 19: Siriusxm® Radio
SiriusXM® Radio Spotify (for KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS) Only SiriusXM® brings you more of what you love to listen to, all in one place. Search for a song or station Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite Press radio. - Page 20 SiriusXM® Radio (for KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS) Select a stored channel Start listening Press one of the number buttons (1 to 6) (or press J / K on the remote Press B SRC repeatedly to select SIRIUS XM. control). Press (or) “ ” indicator lights up.
- Page 21 SiriusXM® Radio (for KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS) SmartFavorites and TuneStart™ On the faceplate Select a stored Press one of the number buttons (1 to 6). User preset channels are initially assigned as the SmartFavorites channels. SmartFavorite SmartFavorite channel is available with SXV200 or later SiriusXM tuner...
- Page 22 SiriusXM® Radio (for KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS) TuneScan™ [CODE SET] 1 Press the volume knob to enter [NEW CODE]. 2 Turn the volume knob to select a number. You can get a short preview of the songs that you have missed on each of 3 Press S / T to move to the entry position.
-
Page 23: Using Other Applications
Using Other Applications JVC Remote application Default: [XX] You can control the JVC car receiver from iPhone/iPod touch (via Bluetooth [REMOTE APP] or via USB input terminal) or Android device (via Bluetooth) using [SELECT] Selects the device ([IOS] or [ANDROID]) to use the application. -
Page 24: Bluetooth
Bluetooth features may not Press B SRC to turn on the unit. work with this unit. Search and select the name of your receiver (“KD-T915BTS”/ • Be sure to turn on the Bluetooth function of the device to make the “KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT“/ following operations. -
Page 25: Bluetooth - Mobile Phone
When there is an incoming call: audio devices and switch between these five devices. (Page 26) • KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS: • Some Bluetooth devices may not automatically connect to the unit after The buttons will blink in the color you have selected in [RING COLOR]. - Page 26 Bluetooth® The following operations may differ or be unavailable depending on the *1 This adjustment will not affect the volume of the other sources. connected phone. *2 Press and hold VOL + to continuously increase the volume to 15. *3 Operations may vary according to the connected Bluetooth device. On the faceplate On the remote control Improve the voice quality...
- Page 27 • “NO HISTORY” appears if there is no recorded call history or call number. 2 Press the volume knob to call. [RING COLOR] KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS: [COLOR 01] to [COLOR 49] ([COLOR 08]): Selects the illumination color for [PHONEBOOK] (Applicable only if the phone supports PBAP.) the buttons as notification when there is an incoming call and during a call.
- Page 28 [YES]: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ; [NO]: Cancels. Bluetooth mode settings [INFORMATION] [MY BT NAME]: Displays the name of your receiver (“KD-T915BTS”/ Press and hold “KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT”/“KD-T710BT”/ Turn the volume knob to select an item (see the following table), then “KD-TD71BT”/“KD-SR86BT”).
- Page 29 “PIN IS 0000” scrolls on the display. been deleted, and the unit exits check mode. Search and select the name of your receiver (“KD-T915BTS”/ • To cancel, press and hold B SRC to turn off the power, then turn on the “KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT”/...
-
Page 30: Bluetooth - Audio
Bluetooth® Bluetooth — Audio On the faceplate On the remote control Press 4 B repeatedly. Repeat play ( Not available ) [TRACK REPEAT], [ALL REPEAT], [GROUP REPEAT]*1, [REPEAT OFF] Random play Press 3 A repeatedly. ( Not available ) [GROUP RANDOM]*1, [ALL RANDOM], [RANDOM OFF] While in BT AUDIO source, you can connect to five Bluetooth audio devices Select a file from a Refer to “Select a file to play”... -
Page 31: Amazon Alexa
For Android device Pair your device with this unit via Bluetooth. (Page 20) Start up the Alexa mobile application on your device. Search and select the name of your receiver (“KD-T915BTS”/ “KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T710BT”/ “KD-TD71BT”/“KD-SR86BT”) on SETUP section of the Alexa mobile application to complete a one-time setup process. - Page 32 AMAZON ALEXA (except for KD-T711BT) Start listening While in Alexa idle state... Press on the unit to activate Alexa. The display shows: “LISTENING...”. Communicate with Alexa via the connected microphone. (Page 20) During music playback in ALEXA source, you can perform the following operations: Basic operations On the faceplate...
-
Page 33: Audio Settings
Audio Settings [PRO EQ] Adjusts your own sound settings for each source. • The settings are stored to [USER] in [PRESET EQ]. • The settings made may affect the current settings of [EASY EQ]. [62.5HZ] [LEVEL –09] to [LEVEL +09] ([LEVEL 00]): Adjusts the level to memorize for each source. (Before making an adjustment, select the source you want to adjust.) [ON]: Turns on the extended bass. - Page 34 Audio Settings [FADER] (Not applicable when 3-way crossover is selected.) [SOUND EFFECT] [POSITION R15] to [POSITION F15] ([POSITION 00]): Adjusts the front [SPACE ENHANCE] (Not applicable for FM/AM source.) and rear speaker output balance. [SMALL]/[MEDIUM]/[LARGE]: Virtually enhances the sound space. ; [BALANCE]*4 [POSITION L15] to [POSITION R15] ([POSITION 00]): Adjusts the left and [OFF]: Cancels.
- Page 35 Front speakers output Rear speakers output – [POSITION R02] is selected in [FADER] and selectable range is [POSITION R15] to [REAR/SUB.W] (default) Front speakers output Subwoofer output [POSITION 00]. (Page 30) [SUB.W/SUB.W] Front speakers output Subwoofer output * Except for KD-T915BTS/KD-T91MBS. ENGLISH...
- Page 36 Audio Settings 2-way crossover setting items Crossover settings Below are the available setting items for 2-way crossover and 3-way [SPEAKER SIZE] crossover. [FRONT] [SIZE] [3.5"]/[4"]/[4.75"]/[5"]/[6.5"]/[6.75"]/[7"]/ CAUTION [4×6]/[5×7]/[6×8]/[6×9]/[7×10] Select a crossover type according to how the speakers are connected. [TWEETER] [SMALL]/[MIDDLE]/[LARGE]/[NONE] (not (Page 46, 47) connected) If you select a wrong type:...
- Page 37 [TWEETER] [HPF FRQ] [1KHZ]/[1.6KHZ]/[2.5KHZ]/[4KHZ]/[5KHZ]/[6.3KHZ]/ [8KHZ]/[10KHZ]/[12.5KHZ] *1 Displayed only when [SPK/PRE OUT] is set to [REAR/REAR] or [REAR/SUB.W]. (Page 31) *2 Except KD-T915BTS/KD-T91MBS: Displayed only when [SPK/PRE OUT] is set to [SLOPE] [–06DB]/[–12DB] [REAR/SUB.W] or [SUB.W/SUB.W]. (Page 31) [PHASE] [REVERSE] (180°)/[NORMAL] (0°) *3 Displayed only when [SUBWOOFER SET] is set to [ON].
- Page 38 Audio Settings Digital Time Alignment settings Determining the delay time automatically If you specify the distance from the currently set Digital Time Alignment sets the delay time of the speaker output to create a listening position to every speaker, the delay time more suitable environment for your vehicle.
-
Page 39: Display Settings
Display Settings Zone identification for brightness settings Press to exit. KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS: To return to the previous setting item, press Default: [XX] [DISPLAY] [DIMMER] Dims the illumination. [OFF]: Dimmer is turned off. Brightness changes to [DAY] setting. [ON]: Dimmer is turned on. Brightness changes to [NIGHT] setting. -
Page 40: Learning Steering Remote Control
Connect to your vehicle’s steering remote • Your setting is stored to [USER] in [PRESET]. Rear panel harness. Contact your JVC dealer for details. • [NIGHT COLOR] or [DAY COLOR] is changed by turning on or off your car’s headlights. Configure the control keys [COLOR GUIDE] [ON]: The illumination color of [ZONE 1] and [ZONE 2] change to white... -
Page 41: References
Turn the volume knob to select [YES], then press the knob. For: – Latest firmware updates and latest compatible item list All the control keys will be reset. – JVC original application Selecting [NO] will cancel the operation. – Any other latest information Visit <www.jvc.net/cs/car/>. - Page 42 • The song order displayed on the selection menu of this unit may differ from that of the iPod/ iPhone. • You cannot operate iPod if “JVC” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate on this unit.
-
Page 43: Change The Display Information
(eg. station name) appears or display will be blank. name (Folder name) File name (Date) Playing time (Date) back to the beginning KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS: iPod FRONT/iPod REAR/ When [HEAD MODE] is selected (page 11): Main display iPod USB/iPod BT Song title (Artist) - Page 44 References KD-T711BT/KD-T710BT/KD-TD71BT/KD-SR86BT: Source name Display information: Main PANDORA/PANDORA BT Station name Station name with Music Synchronization Effect* Main display Shared/Radio Song title Artist Album title Playing time Date back to the beginning Clock display SPOTIFY/SPOTIFY BT Context title Context title with Music Synchronization Effect* Song title Artist Album title...
-
Page 45: Troubleshooting
Troubleshooting Symptom Remedy Symptom Remedy Sound cannot be heard. • Adjust the volume to the optimum level. Playback order is not as The playback order is determined by the order in which • Check the cords and connections. intended. files were recorded (disc) or the file name (USB). “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of Elapsed playing time is not... - Page 46 Troubleshooting Symptom Remedy Symptom Remedy “LOADING” appears when This unit is still preparing the iPod/iPhone music list. It “DISCONNECTED” USB is disconnected from the head unit. Please make sure you enter search mode by may take some time to load, try again later. the device is connected properly through USB.
- Page 47 Troubleshooting Symptom Remedy Symptom Remedy “SUBSCRIPTION UPDATED Your subscription is updated. Press the volume knob to Sound is being interrupted • Reduce the distance between the unit and the Bluetooth – PRESS ENTER TO continue. or skipped during playback audio player. CONTINUE.”...
-
Page 48: Installation/Connection
Contact (USA only) to the terminal on the vehicle’s fuse box which provides 12 V DC power supply and is turned on Call: 1-800-252-5722 ( or ) visit: <http://www.jvc.com> and off by the ignition key. • Keep all cables away from heat dissipate metal parts. - Page 49 Installation/Connection Part list for installation Installing the unit (in-dash mounting) (A) Faceplate (×1) (B) Trim plate (×1) Do the required wiring. (Page 46) (C) Mounting sleeve (×1) (D) Wiring harness (×1) Hook on the top side Orientate the trim Dashboard of plate as illustrated your car before fitting.
- Page 50 Installation/Connection Wiring connection IMPORTANT We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job to professionals for your safety. Consult your car audio dealer. Antenna terminal Vehicle Fuse (10 A) dashboard Factory wiring harness (vehicle)
- Page 51 JVC Amplifier* Output terminals Remote wire (not supplied) No Part For KD-T915BTS: USB cable (DC 5 V 1.5 A) (approx. 1 m/3.3 feet) To remote lead (blue/white) of the wiring harness. (Page 46) For KD-T711BT: Learning steering remote (page 36) Output terminals (See “Connect external amplifiers via output terminals”.)
-
Page 52: Specifications
Specifications FM Frequency Range 87.9 MHz — 107.9 MHz (200 kHz step) USB Standard USB 1.1, USB 2.0 (High speed) 87.5 MHz — 108.0 MHz (50 kHz step) Compatible Devices Mass storage class Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) File System FAT12/16/32 Quieting Sensitivity (DIN S/N = 46 dB) - Page 53 182 mm × 53 mm × 156 mm (7-3/16" × 2-1/8" × 6-3/16") RF Output Power (E.I.R.P.) +4 dBm (MAX), Power Class 2 Net Weight (includes Trimplate, KD-T915BTS: Maximum Communication Range Line of sight approx. 10 m (32.8 ft) Mounting Sleeve) 1.3 kg (2.9 lbs)
- Page 54 libFLAC • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Copyright (C) 2000-2009 Josh Coalson Corporation in the United States and/or other countries. Copyright (C) 2011-2013 Xiph.Org Foundation • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple Redistribution and use in source and binary forms, with or without modification, are permitted provided performance standards.
- Page 55 ENGLISH FRANÇAIS ESPAÑOL KD-T915BTS / KD-T910BTS / KD-TD91BTS / KD-T91MBS / KD-T711BT / KD-T710BT / KD-TD71BT / KD-SR86BT CD RECEIVER For detailed operations and information, refer to the INSTRUCTION MANUAL on the following Quick Start Guide website: RÉCEPTEUR CD Pour les opérations et les informations détaillées, reportez-vous au MANUEL D’INSTRUCTIONS sur Guide de démarrage rapide...
- Page 56 útil, deberán ser reciclados en instalaciones que puedan dar el tratamiento Products: CD RECEIVER adecuado a estos productos y a sus subproductos residuales correspondientes. Model Name: KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS/KD-T711BT/ Póngase en contacto con su administración local para obtener información sobre el KD-T710BT/KD-TD71BT/KD-SR86BT punto de recogida más cercano.
- Page 57 SOFTWARE LICENSE AGREEMENT IC (Industry Canada) Caution This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two The software embedded in the Product (hereinafter the "Licensed Software") provided by Licensor is conditions: copyrighted to or sublicensable by the Licensor, and this Agreement provides for the terms and conditions 1.
- Page 58 Article 4 Right pertaining to the Licensed Software Article 9 Destruction of the Licensed Software Any and all copyrights and other rights pertaining to the Licensed Software and related documents If this Agreement is terminated pursuant to the provision of Article 8, the User shall destroy the Licensed shall belong to the Licensor or the original holder of the right who granted to the Licensor the license or Software, any related documents and copies thereof within two (2) weeks from such date of termination.
- Page 59 Important Notice concerning the Software -CMP The MIT License (MIT) -jansson Copyright (c) 2014 Charles Gunyon Copyright (c) 2009-2012 Petri Lehtinen <petri@digip.org> Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without documentation files (the "Software"), to deal in the Software without restriction, including without...
- Page 60 Installation/Connection Basic procedure Remove the key from the ignition switch, then disconnect the terminal of the car battery. This section is for the professional installer. Connect the wires properly. See “Wiring connection” on page 3. For safety’s sake, leave wiring and mounting to professionals. Consult the car audio dealer. Install the unit to your car.
- Page 61 Installing the unit (without mounting sleeve) Wiring connection Remove the mounting sleeve and trim plate from the unit. Vehicle dashboard Antenna terminal Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (commercially available).
- Page 62 USB input WARNING terminal Do not operate any function that takes your attention away from safe KD-T711BT: driving. KD-T915BTS: USB cable from Detach button CAUTION the rear of the unit Volume setting: Attach Detach How to reset •...
- Page 63 Getting Started Set the basic settings Press and hold Cancel the demonstration Turn the volume knob to select an item (see the following table), then press the knob. When you turn on the power for the first time (or [FACTORY RESET] is set to Repeat step until the desired item is selected or activated.
- Page 64 (USB device/ iPod/iPhone) to the USB input terminal. Settings in memory • KD-T915BTS: You can also connect to the USB cable from the rear of the You can store up to 18 stations for FM and 6 stations for AM.
- Page 65 • Refer to the INSTRUCTION MANUAL on the following website for the detailed explanation of each item: <http://www.jvc.net/cs/car/> • The availability of each item vary depending on the model. Turn the volume knob clockwise to select [SUBWOOFER SET], then press the knob.
- Page 66 [RELAX]/[SUNSET]: The selected color pattern is shown. (Selectable only when [ALL ZONE] is selected Illumination Color Setting in step 4.) For KD-T915BTS/KD-T910BTS/KD-TD91BTS/KD-T91MBS, you can set your Repeat step 4 and step 5 to set color for other zones. preferred illumination color for each zone. Press to exit.
- Page 67 Pair and connect a Bluetooth device for the first time Press B SRC to turn on the unit. Play back/pause Press the volume knob. Search and select the name of your receiver (“KD-T915BTS”/ Select group or folder Press 2 J / 1 K. “KD-T910BTS”/“KD-TD91BTS”/“KD-T91MBS”/“KD-T711BT”/ “KD-T710BT”/“KD-TD71BT”/“KD-SR86BT”) on the Bluetooth device.
- Page 68 • Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards.