General Settings-Psm - JVC KD-DV4206 Instructions Manual

General settings — PSM
You can change PSM (Preferred Setting Mode)
items listed in the table that follows.
1
Enter the PSM settings.
2
Select a PSM item.
Indication
DEMO
Display demonstration
CLOCK H
Hour adjustment
CLOCK M
Minute adjustment
DIMMER
SCROLL* 1
EXT IN* 2
External input
TAG DISP
Tag display
NTSC/PAL
Video format
* 1 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* 2 Displayed only when one of the following sources is selected—FM, AM, or DISC.
Item
• DEMO ON [Initial] : Display demonstration will be activated automatically if no
• DEMO OFF : Cancels.
1 – 12 : See also page 5 for setting.
[Initial: 1 (1:00)]
00 – 59 : See also page 5 for setting.
[Initial: 00 (1:00)]
• ON : Dims the display illumination.
• OFF [Initial] : Cancels.
• ONCE [Initial] : Scrolls the track information once.
• AUTO : Repeats scrolling (5-second intervals).
• OFF : Cancels. (Holding DISP can scroll the display regardless of the
• CHANGER [Initial] : To use a JVC CD changer, [16], or an Apple iPod/a JVC
• : To use any other external component than the above, [18].
EXT IN
• TAG ON [Initial] : Shows the tag while playing MP3/WMA tracks.
• : Cancels.
TAG OFF
• PAL [Initial] : Select this if your monitor is of the PAL color system.
• NTSC : Select this if your monitor is of the NTSC color system.
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other
PSM items if necessary.
5
Finish the procedure.
Setting, [reference page]
operation is done for about 20 seconds, [5].
setting.)
D. player, [17].
20