JVC KD-SH1000 Instruction Manual page 115

Indications Items
Bright 1 – 10 [Initial: 8]
Display brightness
ID3 Tag
•
Tag display
•
Theme
•
Display theme
•
IF Band
•
Intermediate frequency
band
•
Beep • On [Initial]
Key-touch tone • Off
Ext In 2 • Changer [Initial]
*
External input
• Ext In
Tel • Muting 1/
Telephone muting
• Off [Initial]
Amp Gain • High PWR
Amplifier gain control • Low PWR
• Off
1
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
* Displayed only when one of the following sources is selected—FM, AM, CD, SD, USB, or LINE-IN.
2
All manuals and user guides at all-guides.com
Settings, [reference page]
: Adjust the display contrast to make the display indications clear
and legible. (If "Dimmer" is set to "On," selecting "1" to "4" takes
no effect.)
On [Initial] : Shows the Tag information while playing MP3/WMA tracks.
Off : Cancels.
Large : Select the display theme for large graphic display, [5]. See page 22
(1 [Initial] or 2) for setting.
Small : Select the display theme for small graphic display, [5]. See page 22
(1 [Initial] or 2) for setting.
Auto [Initial] : Increases the tuner selectivity to reduce interference noises
between close stations. (Stereo effect may be lost.)
Wide : Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
: Activates the key-touch tone.
: Deactivates the key-touch tone.
: To use a JVC CD changer, [14] or an Apple iPod or a JVC D. player,
[24].
: To use any other external component, [26].
: Select either one which mutes the sounds while using a cellular
Muting 2 phone.
• If CD/CD-CH/SD/USB/iPod/D. player has been selected as the
source, playback pauses during telephone muting.
: Cancels.
: Volume 00 – Volume 50
: Volume 00 – Volume 30 (Select this if the maximum power of the
speaker is less than 50 W to avoid damaging the speakers.)
: Deactivates the built-in amplifier.
21