Playing From A Usb Memory - JVC KD-SH1000 Instruction Manual

!
Attach the control panel.
⁄
• The control panel goes
back to the previous
position.
Playback starts automatically if tracks are
recorded.

Playing from a USB memory

This unit can play MP3/WMA tracks stored in a
USB memory.
All tracks in the USB memory will be played
repeatedly until you change the source.
• Removing the USB memory will also stop
playback.
~
Ÿ
USB memory
To detach the USB memory, straightly pull it
out from the unit.
All manuals and user guides at all-guides.com
If an SD card or USB memory has been
attached...
Playback starts from where it has been stopped
previously.
• If a different SD card or USB memory is
About MP3 and WMA tracks
MP3 and WMA "tracks" (words "file" and
"track" are used interchangeably) are recorded
in "folders."
About the CD changer
It is recommended to use a JVC
MP3-compatible CD changer with your unit.
• You can also connect MP3-incompatible
• You cannot use the CH-X99, CH-X100, and
• You cannot play any WMA disc in the CD
USB input terminal
• Disc text information recorded in the CD
• For connection, see Installation/Connection
To fast-forward or reverse the track
Cautions:
• Avoid using the SD card/USB memory
when it might hinder your safety driving.
• Make sure all important data have been
backed up to avoid losing the data.
currently attached, playback starts from the
beginning.
CD changers. However, these units are not
compatible with MP3 discs.
KD-MK series CD changers with this unit.
changer.
Text can be displayed when a JVC CD Text
compatible CD changer is connected.
Manual (separate volume).
Continued on the next page
15