JVC KD-SH1000 Instruction Manual page 264

3
Select an announce type.
4
Finish the procedure.
• If the ANN indicator lights up,
Announcement Standby Reception is
activated.
• If the ANN indicator flashes,
Announcement Standby Reception is not
yet activated.
To activate, tune in to another service
providing these signals. The ANN
indicator will stop flashing and remain lit.
To deactivate the Announcement Standby
Reception
Select "Off" in step 3 above.
• The ANN indicator goes off.
Tracing the same programme—
Alternative Frequency Reception
You can keep listening to the same programme
by activating the Alternative Frequency
Reception.
• While receiving a DAB service:
When driving in an area where a DAB service
cannot be received, this unit automatically
tunes in to another ensemble or FM RDS
station, broadcasting the same programme.
• While receiving an FM RDS station:
When driving in an area where a DAB service
is broadcasting the same programme as the
FM RDS station is broadcasting, this unit
automatically tunes in to the DAB service.
32
All manuals and user guides at all-guides.com
When shipped from the factory, Alternative
Frequency Reception is activated.
To deactivate the Alternative Frequency
Reception, see page 24.
To show the Dynamic Label Segment (DLS)
information
Lights up when receiving a
service providing DLS.
Back to the beginning
• The DLS screen will be temporarily canceled
when you operate the unit.