®
Prothrombin Time (PT)/INR Monitoring System Self-Test User's Manual
Coag-Sense
through their shelf life if the optional AC power adapter is
plugged in.
If the batteries are running low, the meter displays a BATTERY
LOW message. The meter can run another one or two additional
PT tests, but the batteries should be replaced as soon as
possible. You can plug the optional AC power adapter into a wall
socket and replace the batteries later.
When the message BATTERY TOO LOW SEE MANUAL
appears on the meter display, the meter shuts off after a brief
delay. The batteries must be replaced or the meter must be
connected to a wall socket with the optional AC power adapter to
continue testing. The meter time and date settings are lost and
the meter will need to have the date and time reset. See "Setting
the Time and Date" in this manual.
Complete the following steps to replace the AA 1.5 V
alkaline batteries.
1. Turn the meter upside down.
2. Remove the battery door by
pressing on the battery door
release.
Page 36
For In Vitro Diagnostic Use
CoaguSense, Inc.
Need help?
Do you have a question about the Coag-Sense Prothrombin Time PT/INR and is the answer not in the manual?