CoaguSense Coag-Sense Prothrombin Time PT/INR Self-Test User's Manual page 23

Action
Note ◙: To avoid confusing control strip INR results with patient test
strip INR results, the high control test will display the control
result in PT seconds only.
Note ◙: If anything other than this is displayed, refer to the
"Troubleshooting" section.
Note ◙: The date and time shown in the display are examples only.
The date and time shown after actual testing is the current
date and time.
Note ◙: Remember to repeat this entire procedure with a high
control strip.
12. When high control testing is
complete, the display
shows "OK" and looks
similar to this.
Note ◙: If an error message appears, refer to the "Troubleshooting"
section.
13. Once the controls have been successfully tested, remember to
throw the control strips into a biohazard (SHARPS) container. You
can now proceed to test your blood. If you are not going to test, turn
off the meter by pressing the POWER button.
CoaguSense, Inc.
Meter Display
For In Vitro Diagnostic Use
Performing a Control Test
HI CONTL OK
PT 42.1
12/18/13 4:05 PM
REMOVE STRIP
Page 23