The Coag-Sense PT/INR Test System is designed for
indoor use only.
This equipment generates, uses, and can radiate
radiofrequency (RF) energy. If your meter is not set up
and used according to this User Manual, the RF energy
may interfere with other devices in the area.
This equipment is tested to meet the limits for medical
devices, which is designed to provide a reasonable
protection against harmful interference when the
equipment is operated in a home environment. If not
installed and used in accordance with these instructions,
it may cause harmful interference to other devices in the
vicinity. If this equipment does cause harmful
interference to other devices, which can be determined
by turning the equipment on and off, the user is
encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving device.
Increase the separation between the equipment.
Connect the equipment to an outlet on a circuit
different from that to which the other devices are
connected.
In the unlikely event of an electric power surge (i.e.,
severe static discharge during a thunderstorm), when
using the optional AC power adapter, the display screen
may go blank. If this occurs, unplug the power supply
from the back of your meter, wait 5 seconds and plug it
back in. Normal operation should return, but you may
have to reset the time and date.
DO NOT OPEN THE METER. Do not attempt to repair
or modify this meter. The Coag-Sense Self-Test
PT Meter does not require any periodic maintenance
CoaguSense, Inc.
For In Vitro Diagnostic Use
Warnings and Precautions
Page 13
Need help?
Do you have a question about the Coag-Sense Prothrombin Time PT/INR and is the answer not in the manual?