Power On And Off; Setting The Time And Date - CoaguSense Coag-Sense Prothrombin Time PT/INR Self-Test User's Manual

7. Power On and Off


Install the AA 1.5 V batteries, which are needed to
maintain the time and date settings. (See "Replacing the
Batteries" for more information). The optional AC power
adapter can be connected at this time.

Place the meter on a flat, stable surface. To turn the
meter on. Press the POWER button, which is on the
topside of the meter, beneath the display. To turn the
meter off, press the same POWER button again.

8. Setting the Time and Date

Action
1. If the date and time have
not been set before on the
meter or the setting has
been lost, the display
looks like this with blinking
characters.
2. The blinking characters
may be changed by
pressing + to increase or
– to decrease. When
correct, press NEXT to
advance to the next
character.
CoaguSense, Inc.
Meter Display
DONE
Press NEXT to advance
to next character.
For In Vitro Diagnostic Use
Setting the Time and Date
12:00PM
1/01/13
NEXT
+ -
Page 17