CoaguSense Coag-Sense Prothrombin Time PT/INR Self-Test User's Manual page 21

Action
this is displayed, refer to
the "Troubleshooting"
section.
5. The meter warms the strip.
The display looks like this.
It shows a countdown of the
time remaining during the
warm-up cycle.
Note ◙: Do not apply the control
activation solution until
the warm-up is
complete and the meter
tells you to do so.
6. The meter beeps once when
it is ready for the control
strip activation solution. The
screen looks like this.
Note ◙: You now have 2 minutes to apply the activation solution to
the control strip.
7. Open the control activation
solution and hold at an angle
to allow insertion of the
transfer tube
8. Holding the transfer tube
below bulb insert into control
activation solution.
Note ◙: DO NOT SQEEZE THE BULB. Be careful to avoid getting
CoaguSense, Inc.
Meter Display
For In Vitro Diagnostic Use
Performing a Control Test
WARMING
PLEASE WAIT
24
Warming count
down in seconds
APPLY
CONTROL
SOLUTION
Page 21