Table of Contents
Advertisement
Sununo Plus Series
6.2.2 State
If the country has been set the LCD shows the machine type when the inverter is
started up, then it automatically displays the inverter operation status:Normal,Wait,
Fault, Update.
Data name
Explanation
The inverter in normal (function) operation
Normal
The inverter in stand-by state
Wait
A fault occurs during operation
Fault
The state of updating firmware
Update
Turn on the AC switch, the LCD begins to count seconds backward, after this, the
inverter begins to connect the gird.
Figure 6.3 Count down Seconds
- 33 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Sununo Plus Series and is the answer not in the manual?
Questions and answers
hello what is the message error code 6 GFCI dev err M
Error code 6 for the SAJ Sununo Plus Series indicates "GFCIDevErrM," which means "GFCI Devices Error Master." If this error occurs frequently, users are advised to contact their distributor or SAJ for support.
This answer is automatically generated