Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec TGP 1000 E
Summary of Contents for Trotec TGP 1000 E
- Page 1 TGP 1000 E ORIGINAL INSTRUCTIONS GARDEN PUMP...
-
Page 2: Table Of Contents
Technical instructions must be observed. data chapter. • Do not remove any safety signs, stickers or labels from the device. Keep all safety signs, stickers and labels in legible condition. garden pump TGP 1000 E... - Page 3 (alkalis, acids, etc.), combustible or explosive not in use, remove the mains plug from the mains socket. liquids (petroleum, petrol, etc.) or food (drinking water, etc.). garden pump TGP 1000 E...
- Page 4 • service water supply in the home and garden • be aware of the dangers that occur when working with The water temperature must not exceed 35 °C. electric devices in damp areas. • have read and understood the instructions, especially the Safety chapter. garden pump TGP 1000 E...
- Page 5 Allow the device to cool down and switch it off. Investigate the cause of overheating. Should the problem persist, please contact the customer service. garden pump TGP 1000 E...
-
Page 6: Information About The Device
If you do not use the device for an extended period of time, it must be cleaned thoroughly after its last application and before recommissioning. Deposits and residues could lead to start-up difficulties. For restart, please proceed according to the Start-up chapter. garden pump TGP 1000 E... -
Page 7: Assembly And Installation
Prior to initial start-up, the transport handle must be attached to the device. To do so, please proceed as follows: 1. Use the supplied screws (7) to mount the transport handle (6) to the top of the housing. garden pump TGP 1000 E... - Page 8 2. Connect the pressure line to the pressure connection (2). To do so, apply thread seal tape (e.g. Teflon tape) to the threaded connector of the pressure line to ensure a leak- proof connection. garden pump TGP 1000 E...
- Page 9 The connected suction line should also be completely filled with the pumping medium. 3. Screw the screw plug back onto the water filler neck (3). Ensure a tight fit of the screw plug. garden pump TGP 1000 E...
-
Page 10: Operation
(such as strong vibrations at the pump or pressure line, a fluctuating feed rate or similar). If you leave the device unattended for a longer period of time, interrupt the device's power supply. garden pump TGP 1000 E... -
Page 11: Errors And Faults
If so, wait for approx. 10 minutes before restarting the of the mains socket. device. If the device is not starting, have the electrics checked by a specialist company or by Trotec. Notes on maintenance • The water temperature is above 35 °C and the thermal Inside the device, there are no parts that need to be maintained protection circuit is activated. -
Page 12: Technical Annex
2 mm Pressure connection 1" internal thread Suction connection 1" internal thread Sound values according to EN ISO 3744:1995 Sound pressure level L 72 dB(A) Sound power level L 88 dB(A) Uncertainty K 2 dB(A) garden pump TGP 1000 E... -
Page 13: Disposal
The Annex II, part 1, Section A addresses can be obtained from your municipality or local Herewith, we – Trotec GmbH & Co. KG – declare that the administration. For further return options provided by us please machinery designated below was developed, constructed and refer to our website www.trotec24.com. - Page 14 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the TGP 1000 E and is the answer not in the manual?
Questions and answers