Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trotec TGP 1000 ES
Summary of Contents for Trotec TGP 1000 ES
- Page 1 TGP 1000 E /TGP 1000 ES ORIGINAL INSTRUCTIONS GARDEN PUMP...
-
Page 2: Table Of Contents
Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the instructions must be observed. garden pump TGP 1000 E /TGP 1000 ES... - Page 3 • Have all electrical installations carried out by an expert according to the national regulations and the device- specific requirements. • Hold onto the mains plug while pulling the power cable out of the mains socket. garden pump TGP 1000 E /TGP 1000 ES...
- Page 4 • Do not use the device for drinking water supply, and do not integrate it into the drinking water circuit. In addition, please observe the local regulations of the water and wastewater authorities. garden pump TGP 1000 E /TGP 1000 ES...
- Page 5 Switch the device off and let it cool down. Investigate the cause of overheating. Should the problem persist, please contact the customer service. garden pump TGP 1000 E /TGP 1000 ES...
-
Page 6: Information About The Device
If you do not use the device for an extended period of time, it must be cleaned thoroughly after its last application and before recommissioning. Deposits and residues could lead to start-up difficulties. For restart, please proceed according to the Start-up chapter. garden pump TGP 1000 E /TGP 1000 ES... -
Page 7: Assembly And Installation
Prior to initial start-up, the transport handle must be attached to the device. To do so, please proceed as follows: 1. Use the supplied screws (7) to mount the transport handle (6) to the top of the housing. garden pump TGP 1000 E /TGP 1000 ES... - Page 8 2. Connect the pressure line to the pressure connection (2). To do so, apply thread seal tape (e.g. Teflon tape) to the threaded connector of the pressure line to ensure a leak- proof connection. garden pump TGP 1000 E /TGP 1000 ES...
- Page 9 The connected suction line should also be completely filled with the pumping medium. 3. Screw the screw plug back onto the water filler neck (3). Ensure a tight fit of the screw plug. garden pump TGP 1000 E /TGP 1000 ES...
-
Page 10: Operation
If you TDP DSP (with plug) 4.610.000.291 leave the device unattended for a longer period of time, interrupt the device's power supply. TDP DS (without plug) 4.610.000.290 garden pump TGP 1000 E /TGP 1000 ES... -
Page 11: Errors And Faults
Insufficient or decreasing conveying capacity: • Check whether the suction height or delivery head exceeds the max. specifications indicated in the technical data, and reduce it if necessary. garden pump TGP 1000 E /TGP 1000 ES... -
Page 12: Technical Annex
1" internal thread 1" internal thread Suction connection 1" internal thread 1" internal thread Sound values according to EN ISO 3744:1995 Sound pressure level L 72 dB(A) 72 dB(A) Sound power level L 88 dB(A) 88 dB(A) Uncertainty K 2 dB(A) 2 dB(A) garden pump TGP 1000 E /TGP 1000 ES... - Page 13 Triangular groove screw Philips Screw Square Seal Washer Bearing Waterproof Switch Rotor Switch Cover Bearing Outer Frame of Switch Stator Capacitor Motor Housing (105) Capacitor Holder Under Washer Power Cord Rear Cover garden pump TGP 1000 E /TGP 1000 ES...
- Page 14 Terminal Box Cover Plastic Handle Triangular groove screw Philips Screw Square Seal Washer Bearing Waterproof Switch Rotor Switch Cover Bearing Outer Frame of Switch Stator Capacitor Motor Housing Capacitor Holder Under Washer Power Cord garden pump TGP 1000 E /TGP 1000 ES...
-
Page 15: Disposal
TGP 1000 E /TGP 1000 ES... - Page 16 Trotec GmbH Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...
Need help?
Do you have a question about the TGP 1000 ES and is the answer not in the manual?
Questions and answers