Children shall not play with the appliance. Cleaning and operating manual must be observed. user maintenance shall not be made by children without supervision. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Page 3
• Wear sturdy shoes to protect yourself against electric shock. • Do not use the power cable to drag the device. • Provide appropriate frost protection. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Page 4
• be aware of the dangers that occur when working with electric devices in damp areas. • have read and understood the operating manual, especially the Safety chapter. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Page 5
This symbol indicates that the pump must be submerged into the water at a slight angle to allow the remaining air to escape. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Make sure that the backflow preventer (9) is positioned correctly. 3. Put the seal ring (11) onto the retainer (10) including backflow preventer (9). The profiled side rests on the retainer (10). submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Page 8
6. Push the hose (inner diameter 25 mm or 32 mm) onto the reducer (7) all the way to the stop. 7. Affix the hose by means of the hose clamp. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Page 9
1. Fasten the supplied nylon cord to the transport handle (1) by pushing the cable into the float switch locking device (3) at the top of the device. at the side of the pump. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
1. Hold onto the mains plug while pulling the power cable out of the mains socket. 2. If necessary, pull the device out by means of the nylon cord. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
• Check whether the hose line is kinked or blocked. Remove kinks and / or blockages. • Check whether the reducer (7), the backflow preventer (9) and / or the elbow (8) are blocked. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...
Your device still does not operate correctly after these checks? Please contact the customer service. If necessary, bring the device to an authorised specialist electrical company or to Trotec for repair. submerged clear water pump, near-ground suction TWP 4005 E / TWP 7505 E / TWP 9005 E...