Table of Contents
Advertisement
Installation Instructions
Please read and follow the 'Safety and warnings' and 'Installation
instructions' sections carefully before using your dryer!
TRANSPORT
Move your packaged appliance carefully and note the front, back
and sides as indicated on the appliance box. If the dryer cannot
be transported in the erect position, the dryer should be slanted
at less than 30° from the right hand side (when viewed from the
front).
MOVING YOUR APPLIANCE
If the dryer needs to be placed at an angle for moving, only angle
towards the right hand side (when viewed from the front). If the
dryer has not been transported as described, leave it standing
upright for at least one hour before turning on. Accessories Please
check you received the following accessories with your dryer. You
will find them inside the drum:
• 1 x Bypass hose (drain hose)
• 1 x Installation instructions and user guide
UNPACKING
To ensure the best performance from your new dryer please follow
the instructions below.
Removing the packaging
1. Remove the outer packaging (including the polystyrene packer
and plastic wrapping). All packaging must be removed prior to
use.
2. Tilt the machine backwards and 'walk' it off the base one foot at
a time. Not doing so may cause damage to your floor and dryer.
3. Remove all packaging and accessories from inside the drum
and ensure you remove protective covers from door and console.
IMPORTANT!
• Ensure packaging materials are kept out of reach of children, as
bags present suffocation risks.
• Please help protect the environment and dispose of the
packaging from around the dryer in an environmentally friendly
manner.
INSTALLATION POSITION
Give some consideration to the location/position of your dryer and
follow the following important requirements:
• The dryer must be installed in a well-ventilated and dust-free
environment.
INSTALLATION
• The dryer must not be installed on any textured floor coverings
(eg carpet, rugs) to ensure that openings at the base of the
machine are not obstructed. For this reason, you must not remove
the feet.
• To keep vibration and noise to a minimum during use, please
ensure that the floor is solid and level.
• Air must be able to circulate freely all round the appliance. Do
not obstruct the front air inlet or the air intake grills at the back of
the machine.
• Do not install the dryer behind a lockable door, sliding door,
or behind a door where the hinge is on the opposite side to that
of the dryer in such a way that the full opening of the door is
inhibited. Ensure the dryer door can always be opened fully.
• It is recommended that, for your convenience, the machine is
positioned close to your washing machine.
Note: this dryer CANNOT BE INVERTED AND MOUNTED ON THE
WALL.
INSTALLATION OPTIONS
Your dryer can be installed one of two ways, either freestanding,
or stacked on top of a compatible Kogan front loading washing
machine.
FREE STANDING
The dryer stands on the floor and can easily be moved into
position. Follow the installation position guidelines.
STACKING
Your dryer has been designed to be able to be stacked on top of
a compatible Kogan front loading washing machine. A stacking kit
MUST BE USED between the products and fitted correctly to the
washing machine and dryer, as per the stacking kit instructions.
Contact the Kogan after sales service team to inquire about
purchasing the stacking kit.
9
6
Advertisement
Table of Contents
