Table of Contents
Advertisement
Getting Started
Once your dryer is installed, please follow these steps before first
use.
1. Place a small amount of fabric (such as clean rags) into the
drum.
2. Plug the dryer into it's power point and switch the power point
on.
3. Press the On/Off button.
4. Select the Refresh Program, press the Start/Pause button.
5. After the completion of this program, please follow the
"Cleaning and Care" Instructions within this user manual, to
clean the lint filter.
GENERAL ADVICE
• Before drying clothes, ensure that they have been thoroughly
spun within the washing machine to remove as much water
as possible. This will reduce the drying time and save energy
consumption.
• Before drying, please close any zips, hooks and eyelets, button
up, tie fabric belts, etc.
• Avoid over drying the clothes, as this can lead to creases and/or
shrinkage.
• Do not dry the articles containing rubber or similar elastic
materials such as raincoats, bicycle covers, etc.
• The door can be opened only after the program of the drying
machine is completed. Do not open the door before the
program finished, as the skin may be scalded by steam or a hot
surface.
• Clean the lint filter and empty the water container after each
use.
• The compressor and heat pump during operation will create
some noise which is entirely normal.
• Please choose the related program designed for your relevant
clothes choice.
The weight references as follows:
6
11
Advertisement
Table of Contents
