B.4.4 Serial Communication
The Prototyping Board allows you to access the serial ports from the RCM4200 module.
Table B-5 summarizes the configuration options. Note that Serial Ports E can be used only
when the RCM4210 is installed on the Prototyping Board.
Table B-5. Prototyping Board Serial Port Configurations
Serial Port
A
B
C
D
E
Serial Ports E may be used as a serial port, or the corresponding pins at header location J2
may be used as parallel ports.
User's Manual
Header
Default Use
J2
Programming Port
A/D Converter
J2
(RCM4200 only)
J2, J4
Serial Flash
J2, J4
J2
Alternate Use
RS-232
RS-232
RS-232
RS-232
—
—
—
113