Free Wheel Operation (Fig. 14); Anti-Tip Wheels; Starting To Drive Your Scooter; Getting Started - Shoprider Scootie TE-787NA User Manual

The free wheel release lever (red handle) is located next to the right rear wheel (Fig. 14). To
disengage the motor, lift up the lever (the scooter can now be pushed). To re-engage the motor push
down on the lever.
WARNING! Always re-engage the free wheeling device after use.

Anti-tip wheels

The anti-tip wheels are located at the rear of the scooter frame (Fig. 14). The scooter should not be
used unless the anti-tipping wheels are in place.
Shoprider® Mobility Products, Inc. is not responsible for damage or injury incurred due to
Anti-Tip Wheels

Getting Started

• Select a level area with plenty of space.
• Mount the scooter, either by lifting the arm and sliding onto the seat or rotate the seat outwards
and then rotate the seat back to face the tiller.
• Adjust the tiller and seat as previously described.

Starting Scooter Movement

• Ensure that you are seated in a comfortable position.
• Turn the key to the on position.
• Your speed setting should be on 1 or 2.
• Push your right hand thumb lever and the scooter will move forward slowly. The harder you
press, the faster the scooter goes but will only reach the speed level that has been selected.
• Release the lever and the scooter will slowly come to a stop as the magnetic brake automatically
engages.
9/22/2004

FREE WHEEL OPERATION (FIG. 14)

Failure to do so may result in injury.
improper or misuse of the scooter.
Figure 14

STARTING TO DRIVE YOUR SCOOTER

10
Free Wheel
Lever (Red)