MCi Reliability Driven Series Operator's Manual page 9

DRIVER'S SEAT BELT
Driver's Seat Belt Adjustment
Using the restraint system can lessen the
severity of injury in an accident or sudden
maneuver.
While seated straight and well back into the seat,
adjust the belt as necessary.
To unfasten the belt, push the release button.
If a belt jams, you may be able to release it by
working the belt in and out until the belt rewinds far
enough to unlock. If the belt remains jammed or
other restraint system parts do not work properly,
report the condition to service personnel promptly.
Seat Belt Inspection
Every 30 days, check the belt, buckle, latch plate,
retractor and guide loops for proper operation.
Check for loose or damaged parts. Keep sharp
edges and sharp objects away from belts and other
parts of the restraint system.
Keep the belts clean and dry. Replace belts if the
webbing appears frayed, cut or damaged. Replace
belts that have been involved in an accident. Have
parts replaced if there are any questions as to their
condition. Clean seat belts with mild soap and
lukewarm water only; do not bleach or dye.
July 2015
MIRRORS
Inside Rear-view Mirrors (Optional)
The inside rear-view mirrors can be manually
adjusted up, down or sideways.
Exterior Rear-view Mirrors
Exterior mirrors have separate upper and lower
segments. The convex upper portion is for wide-
angle view.
Adjust the exterior mirrors so that you can see the
side of the coach in part of the mirror. This helps
determine the relationship of the coach to objects
seen in the mirror.
The roadside and curbside mirror controls are on
the lower LH console switch panel. Use the switch
in the center of each mirror control to select the
upper or lower mirror. Move the switch to the left to
adjust the lower mirror and to the right to adjust the
upper mirror.
Defrost the mirrors using the mirror heat switch
located below the mirror controls.
7