MCi Reliability Driven Series Operator's Manual page 36

13. Grab the top of the platform and apply enough
force to pull down platform to horizontal
position, ensuring that it engages on the pin of
the handrail assembly.
(Figure 35. and Figure 36.)
Figure 35.
Figure 36.
14. Grip outer barrier and pull outer platform out
fully, ensuring the center transition plate
engages (locks) outer platform.
Figure 37.
The platform will not raise or lower unless the
outer barrier is in the vertical and locked
position.
34
Figure 38.
15. Exhaust the door locks and actuating cylinder
on the cabin door by placing the air dump valve
to the release position (Figure 39.).
16. Reach into the compartment and push the
manual latch handle upwards to release the
cabin door (Figure 39.).
Figure 39.
1. Latch handle location
2. Air dump valve
17. When the passenger is ready to board, grasp
the edge of the cabin door to open it fully, and
secure in full open position. using rocker switch
on door (Figure 40.).
Figure 40.
July 2015