MCi Reliability Driven Series Operator's Manual page 23

4-in-1 Gauge: (cont'd)
Oil Pressure - The oil pressure gauge reads engine
oil pressure in pounds per square inch or kilo
Pascals. Oil pressure should be between 50 - 70 psi
(345 - 483 kPa). The LED lights when the oil
pressure is too low.
Coolant Temperature - The coolant temperature
gauge reads engine coolant temperature in degrees
Fahrenheit or Celsius. The normal operating range
is 160-226F (71-108C). The LED lights when the
temperature is above normal. Obtain service as
soon as possible.
3. 3-in-1 Gauge:
Fuel - The fuel gauge reads the fuel level
in the tank.
Diesel Exhaust Fluid (DEF) - The DEF
gauge reads the fluid level in the tank.
Engine Tachometer - The engine
tachometer reads engine revolutions per
minute.
July 2015
4. Voltmeter - The voltmeter reads the condition
of the 24-volt electrical system. The gauge is
calibrated in volts. The needle should be from
27 to 29 volts. If below 27 volts, the batteries
are undercharging. If above 29 volts, the
batteries are overcharging. Have the system
checked if over- or undercharging. The LED
lights when voltage is too low.
5. Transmission Temperature
6. Plug
7. Vent
8. SmarTire SmartWave Full Function Display -
The SmartWave tire monitor system provides
tire pressure deviation alert, low pressure
warning and high temperature alert for all tire
positions.
SmartWave display functions:
1. ALARM tell-tale light to alert driver.
2. Display screen shows alert icons, tire location
and numerical unit of pressure or temperature.
3. Control buttons to scroll through display.
21