YOKOGAWA ZX8D User Manual page 3

CAUTION
• This unit should be installed in a place which conforms to the conditions noted in the
instruction manual. Otherwise, it may cause electric shocks, fire or malfunction of the unit.
• During installation work, care should be taken to keep the unit free from entry of cable chips
or other foreign objects. Otherwise, it may cause fire, trouble or malfunction of the unit.
• The unit must be earthed as specified. Otherwise, it may cause electric shocks, malfunction,
etc.
• Be sure to use a power supply of correct rating. Connection of power supply of incorrect
rating may cause fire.
• Wiring work must be performed with all the power supplies to OFF to prevent electric
shocks.
• Use wiring materials that match the rating of the unit. Use of wiring materials out of rating
may cause fire.
• Wiring at a place which is exposed to water or rain, is prohibited in order to prevent electrical
shock or damage to the instrument.
• To avoid electrical shock, be sure to turn OFF the source power supply before work.
• To prevent burning your hands, be sure to turn OFF the source power supply before
cleaning the piping outlet. After power off, wait until the piping outlet cools down.
• Beware of acid fluid inside the pipe. If acid fluid should contact your skin or clothes,
immediately wash them with large amount of tap water. If they should splash onto your
eyes, seek medical attention at once.
• Do not use replacement parts other than those specified by the maker. Otherwise intended
performance may not be obtained, or accidents or faults may result.
• Replacement parts such as a maintenance part should be disposed of as incombustibles.
• If the cause of any fault cannot be determined despite reference to the instruction
manual, be sure to contact local sales representative or service office. If the instrument is
disassembled carelessly, you may have a shock hazard or injury.
• Do not use a replacement part other than specified by the instrument maker. Otherwise,
adequate performance will not be provided. Besides, an accident or fault may be caused.
Specification check
l
When the instrument arrives, unpack the package with care and check that the instrument
has not been damaged during transportation. In addition, please check that the specification
matches the order, and required accessories are not missing. Specifications can be
checked by the model codes on the nameplate. Refer to Chapter 2 Specifications for the list
of model codes.
IM 11G00E01-01EN 6th Edition : May. 21, 2018-00
ii