Inspection/Service/Pre-Hire Check List - nifty 170SD series Operating/Safety Instructions Manual

6.2

INSPECTION/SERVICE/PRE-HIRE CHECK LIST

MACHINE SERIAL NO
TOWING
Machine secured on trailer
Straps correctly positioned and tightened
Wheels chocked if necessary
AXLES, WHEELS AND BRAKES
Wheels are secure, tyre condition acceptable
Wheel bearings O.K.
Brake linkages and cables secure
Brake shoe wear not excessive
Machine climbs slope
Brakes hold machine on slope
Rear hub nut secure
Track rod secure, not fouling axle plate
BASE
Operation of base control valve and buttons
Operation of all booms over full range
Wheel bearings OK
Cylinders are silent
Cage is level over full range
Booms, levelling rods not damaged or distorted
Booms levelling rods, cylinders not fouling
Hoses not tight, kinked or fouled
Operation of emergency hand pump
SLEWING
Slew assembly and motor are secure
Worm/wheel mesh correct, no excessive wear
No end float of worm in housing
Slew wheel bolts secure
Slew guards secure
CAGE
Operation of control valve and buttons
Levelling lock valve holds in both directions, lines vented
Operation of all booms over full range
Cylinders are silent
Cage levelling over full range
Slewing smooth over full range
Operation of boom 4 over full range (if fitted)
No excessive movement of boom 4 and boom 3
English/USA 09/03
Operating & Safety Instructions
PASS FAIL
SD Series
N/A
38