nifty 170SD series Operating/Safety Instructions Manual page 11

2.1.21
Under all travel conditions the operator shall limit travel speed according to conditions of ground
surface, congestion, visibility, slope, location of personnel and other factors causing hazards of
collision or injury to personnel.
2.1.22
The aerial platform shall not be driven on grades, side slopes or ramps exceeding those for which
the aerial platform is rated by the manufacturer.
2.1.23
It shall be the responsibility of the user to determine the hazard classification of any particular
atmosphere or location. Aerial platforms operated in hazardous locations shall be approved and
suitable for the duty. (See ANSI/NFPA 505-1987 where applicable).
2.1.24
The operator shall immediately report to his supervisor any potentially hazardous location(s)
(environment) which become evident during operation.
2.1.25
If an operator encounters any suspected malfunction of the Niftylift or any hazard or potentially
unsafe condition relating to capacity, intended use or safe operation, he shall cease operation of the
Niftylift and request further information as to safe operation from his management, or owner, dealer
or manufacturer before further operation of the Niftylift.
2.1.26
The operator shall immediately report to his superior any problems or malfunctions of the Niftylift,
which becomes evident during operation. Any problems or malfunctions that affect the safety of
operation shall be repaired prior to continued use.
2.1.27
The boom and platform of the Niftylift shall not be used to jack the wheels off the ground.
2.1.28
The Niftylift shall not be used as a crane.
2.1.29
The Niftylift shall not be positioned against another object to steady the platform.
2.1.30
Care should be taken to prevent rope, electric cords and hoses from becoming entangled in the
aerial platform.
2.1.31
Batteries shall be recharged in a well ventilated area free of flame, sparks or other hazards which
may cause explosion. Highly explosive hydrogen gas is produced during the charging process.
2.1.32
When checking electrolyte levels great care should be taken to protect eyes, skin and clothing.
Battery acid is highly corrosive and protective glasses and clothing is recommended.
2.1.33
If the platform or elevating assembly becomes caught, snagged or otherwise prevented from
normal motion by adjacent structure or other obstacles, such that control reversal does not free the
platform, all personnel shall be removed from the platform safely before attempts are made to free
the platform using ground controls.
2.1.34
English/USA 09/03
When the machine is not in use always stow the booms correctly. NEVER
LEAVE THE KEYS IN THE MACHINE, if it is to be left for any period of time.
Use wheel chocks if leaving on an incline.
Operating & Safety Instructions
SD Series
9