Activating Leds - ABB Relion 670 series Operation Manual

Section 7
Operating procedures
10.
Press
11.
Confirm the change with
7.4.2

Activating LEDs

To activate the LEDs, they must be configured with PCM600.
1.
Select Main menu/Configuration/HMI/LEDs and press
IEC13000056 V2 EN-US
Figure 59: Alarm groups
The list can contain three alarm groups at the maximum. The amount of groups depends
on the amount of LEDs taken into use.
2.
Select an alarm group with
3.
Select an Alarm LED with
4.
Press
5.
Press
68
IEC13000049 V2 EN-US
Figure 58: Changing the setting value
or to change the value.
.
to confirm the selection and to change the Alarm LED mode.
or to change the value and
IEC13000049-2-en.vsd
IEC13000056-2-en.vsd
or and press .
or .
to confirm the selection.
1MRK 500 127-UEN D
GUID-C63971C7-EDC8-40BA-B53B-7377AA33FCC5 v6
.
670 series
Operation manual