Recorded Data; Creating Disturbance Recordings; Monitoring Disturbance Recorder Data - ABB Relion 670 series Operation Manual

Section 7
Operating procedures
7.1.3

Recorded data

The IED is provided with intelligent and flexible functionality that collects different kinds of
data. The recorded data gives substantial information for post fault analysis.
• Disturbance records
• Events
7.1.3.1

Creating disturbance recordings

Normally disturbance recordings are triggered by the IED applications but the recording can
also be triggered manually.
1. Select Main menu/Disturbance records.
2.
Select Manual Trig with
3.
Press
GUID-D18A9DC0-4392-4BAF-86D0-C43F2714B428 V1 EN-US
Figure 35: Manual triggering
The disturbance recorder is now triggered.
7.1.3.2

Monitoring disturbance recorder data

Read individual disturbance recordings from the IED with the PCM600 software to monitor
disturbance recorder data.
1. Select Main menu/Disturbance records.
All disturbance records are listed.
2.
Scroll the view with
54
Set the DRPRDRE Operation to On via LHMI or PCM600 and at least one channel
has to be connected. To make the setting, select Main menu/Settings/IED
Settings and then Monitoring/Disturbance report/DisturbanceReport/
DRPRDRE:1.
or
to execute manual triggering.
or .
.
IEC13000261-1-en.vsd
1MRK 500 127-UEN D
GUID-1E9CFEC1-6245-4612-B637-821951B95D60 v7
GUID-B0CE46C1-1219-4BA2-9627-E53FC0413409 v5
GUID-CBA8221F-A0F8-4043-98D7-577830F29F7F v6
670 series
Operation manual