ABB Relion 670 series Operation Manual page 39

1MRK 500 127-UEN D
IEC12000157 V3 EN-US
Figure 14: Entering the password
7.
Select OK on the on-screen keyboard and press
8.
Select OK in the Log on dialog and press
to cancel the procedure.
If the login fails, a message is displayed on the display.
IEC12000158 V4 EN-US
Figure 15:
If a false password is entered three times, the login is blocked for that ID and the
following message is displayed:
IEC13000283 V1 EN-US
Figure 16: Error message indicating blocked ID
IEC12000160 V2 EN-US
Figure 17:
670 series
Operation manual
IEC12000157-3-en.vsd
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 shall be used in user names. User
names are not case sensitive. For passwords see the Password policies in
PCM600.
IEC12000158.vsdx
Error message indicating an incorrect password
IEC13000283-1-en.vsdx
The logon dialog appears if the attempted operation requires another
level of user rights.
Once a user is created and written into the IED, login is possible with the
password assigned in the tool. If there is no user created, an attempt to
login causes the display to show a corresponding message.
IEC12000160-2-en.vsd
No user defined
to stop editing the password.
to confirm the login, or press
Section 5
Using the HMI
or Cancel
33