Table of Contents
Advertisement
6-3 Extended Menu
6-3-1 Items in the Extended Menu
The extended menu contains the following items.
In the "Settings" column of the table, the factory
default settings are indicated by an enclosing box.
Item number Item name
101
SELECTION FOR
SEARCH DIAL ENABLE
102
MAXIMUM SPEED
103
AUDIO SELECTED LINE
OUT
104
AUDIO MUTING TIME
105
REFERENCE SYSTEM
ALARM
CAPSTAN LOCK
106
Menu items in the 100s, relating to the control panels
Settings
Select how the unit enters the search mode.
DIAL : Turning the search dial switches to search mode.
KEY: One of the JOG, SHUTTLE, and VAR buttons must be pressed to switch to
search mode.
Select the fast forward and rewind tape speed during tape playback, and the
search mode speed during playback from tape or hard disk.
MAX : Perform fast forward, rewind, and search mode playback at the maximum
speeds.
MX/24: Perform fast forward and rewind at the maximum speeds, and search
mode playback at up to 24 times normal speed.
X24: Perform fast forward and rewind at 24 times normal speed, and search
mode playback at up to 24 times normal speed.
Maximum fast forward and rewind speeds
• Analog cassette: 35 times (DNW-A65) or 42 times (DNW-A65P) normal speed.
• Digital cassette: 78 times normal speed
Maximum search mode speeds
• Analog cassette: 35 times (DNW-A65) or 42 times (DNW-A65P) normal speed.
• Digital cassette: 78 times normal speed
Select the output signal to the MONITOR OUTPUT connectors.
MANU : Output the signals selected by the AUDIO MONITOR SELECT buttons
on the upper control panel.
AUTO1: Output stereo, using the AFM channels (3 and 4) for playback from
metal tape, and the LNG channels (1 and 2) for playback from oxide tape.
AUTO2: Output the signals selected by the AUDIO MONITOR SELECT buttons
on the upper control panel, but during variable speed playback, if AFM is
selected, automatically switch to LNG.
Select the length of time for which audio muting occurs when the unit switches to
playback either from stopped or from still playback in the search mode.
OFF : Set the audio muting time to zero (i.e. no muting).
0.1S ... 1.0S: Set the audio muting time from 0.1 seconds to 1.0 second, in 0.1-
second increments.
Select whether or not to display a warning when no video/audio reference signal
is input to the REF. VIDEO INPUT connector.
OFF: No warning.
ON : Flash the STOP button as a warning.
Select the capstan servo lock mode.
SW : The capstan servo lock mode is determined by the CAPSTAN LOCK switch
on the subsidiary control panel.
2F: The capstan servo locks every two fields regardless of the setting of the
CAPSTAN LOCK switch on the subsidiary control panel.
4F: The capstan servo locks every four fields regardless of the setting of the
CAPSTAN LOCK switch on the subsidiary control panel.
8F (For 625 mode only): The capstan servo locks every eight fields regardless of
the setting of the CAPSTAN LOCK switch on the subsidiary control panel.
(Continued)
6-9
Chapter 6 Menu System
Advertisement
Table of Contents
