Table of Contents
Advertisement
1-8. Setup Extended Menu
1-8. Setup Extended Menu
The extended menus of the setup menu are usually not accessible. To display them, set the DIP switch on
the SY-259B board as follows:
n
For details on H-, 9- and B-series items, refer to the operation manual supplied with the unit.
For details on F-series items, refer to the maintenance manual, volume-1.
1. Pull up the handle so it bows upwards, and then loosen the two lid screws using a coin and so on to
remove the sub panel (TOP).
Lid screws
Sub panel (TOP)
Handle
2. Set the switch S201-1 on the SY-259B board to "ON."
SY-259B board
S201
ON
3. Reattach the sub panel (TOP).
1-12
DNW-A28
DNW-A28P
Advertisement
Table of Contents
