Table of Contents
Advertisement
Item number Item name
118
KEY INHIBIT SWITCH
EFFECTIVE AREA
Sub-item
1
REMOTE SELECT
2
MONITOR SELECT
3
CONTROL PANEL
119
VARIABLE SPEED LIMIT
IN KEY PANEL CONTROL
120
CTL LOCK IN VAR/SHTL
Item number Item name
201
PARA RUN
202
CF FLAG (valid only in
625 mode)
Menu items in the 100s, relating to the control panels (Continued)
Settings
Select which switches and buttons can be operated when the KEY INHIBIT
switch on the subsidiary control panel is set to ON. The following sub-items
control different sets of switches and buttons independently.
Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel
is enabled.
DIS : Disabled.
ENA: Enabled.
Select whether the audio signal selection buttons in the upper control panel are
enabled.
DIS : Disabled.
ENA: Enabled.
Select which switch and button operations can be carried out from the control
panel of this unit or an external control panel connected to this unit.
DIS : All switches and buttons are disabled.
DMC: All switches and buttons for DMC playback operations are disabled.
ENA: All switches and buttons are enabled.
Select the playback speed range when carrying out playback in variable mode
from the control panel of this unit.
OFF : For a digital tape, from –1 to +2 times normal speed; for an analog tape,
from –1 to +3 times normal speed.
ON: For both digital and analog tapes, from 0 to +1 times normal speed.
Select whether the tape transport should be phase-locked to the CTL signal
during playback in variable or shuttle mode.
OFF : Not phase-locked.
ON: Phase-locked at the following speeds: –1, –0.5, 0.5, 1.0 and 2.0 times
normal.
Menu items in the 200s, relating to the remote control interface
Settings
Select whether or not to use synchronized operation for two or more VTRs
(including players).
DIS: No synchronized operation.
ENA: Use synchronized operation.
Note
To use synchronized operation for two or more VTRs, set item 201 to "ENA" on
all of the VTRs.
Select the mode for locking to the color framing sent from the remote controller.
8F : Eight-field locking mode
4F/8F: Four- or eight-field locking mode
6-11
Chapter 6 Menu System
Advertisement
Table of Contents
