Malfunctions, Cause, Remedy; Malfunctions During Operation - Silvercrest MONSIEUR CUISINE PLUS SKMK 1200 A1 Operating Instructions Manual

BB&3(B)5ERRN 6HLWH  )UHLWDJ  -XQL   

16. Malfunctions, Cause, Remedy

16.1 Malfunctions during operation

Malfunction
Device does not start.
Liquid underneath the
device
Liquid escapes at the
lid|32 of the blender
jug|5
No temperature can be
set.
Parts of the device are
discoloured.
A speed setting ex-
ceeding 3 cannot be
selected.
Cause
Blender jug|5 is not posi-
tioned correctly
Lid|32 or deep steamer bas-
ket|3 have not been placed
correctly onto the blender
jug|5.
No power supply
The blade assembly|27 has
not been inserted correctly so
that the blender jug|5 is leak-
ing.
Seal|26 for the blade assem-
bly is defective.
Liquid escaped from the
blender jug|5 flowing onto
the surface through the over-
flow hole|10 of the base
unit|12. (see "Overflow" on
page 51)
Seal|31 has not been inserted
correctly.
Seal|31 is defective.
A speed setting 4 - 10 was se-
lected.
Certain food or spices (e.g.
curry) may discolour plastic.
This is not a defect with the de-
vice
A temperature has been set.
Remedy
Insert blender jug|5 correctly (see
"Insert blender jug" on page 53).
Place lid|32 or deep steamer bas-
ket|3 correctly.
Check mains plug|7, main
switch|6 and possibly the fuse.
Insert blade assembly|27 correctly
(see "Using and removing the
blade assembly" on page 52).
Insert new seal|26 (see "Clean-
ing, checking and replacing seals"
on page 61).
When mixing liquids at speed 10
or with button TURBO|18, the
blender jug|5 must not contain
more than 1 litre, since otherwise
liquid may be ejected. For speed
settings of less than 10, the blend-
er jug|5 may only be filled up to a
maximum of 2.2 litres.
Insert seal|31 correctly (see
"Cleaning, checking and replac-
ing seals" on page 61).
Insert new seal|31 (see "Clean-
ing, checking and replacing seals"
on page 61).
Select speed setting 0 - 3 (see "Set-
ting the speed" on page 50)
Remedy unnecessary, since not
harmful to health.
Set temperature to 0.
GB
63