Description - RuggedCom RSG2300 Installation Manual

Chapter 1
Introduction
• Full duplex operation and flow control (IEEE 802.3x)
• Long haul optics allow Gigabit at distances up to 90 km
• Pluggable Optic module support: SFP, GBIC
• Multiple connector types (ST, MTRJ, LC, SC)
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Zero-Packet-Loss™ technology
• -40 to 85 °C (-40 to 185 °F) operating temperature (no fans)
• Conformal coated printed circuit boards (optional)
• 18 AWG galvanized steel enclosure
• Hazardous Location Certification: Class 1 Division 2
Universal Power Supply Options
• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88-300 VDC or 85-264 VAC
• Popular low voltage ranges: 24 VDC (12-36 VDC), 48 VDC (36-59 VDC)
• Screw or pluggable terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Section 1.2

Description

The RUGGEDCOM RSG2300 features various ports, controls and indicator LEDs on the display panel for
connecting, configuring and troubleshooting the device. The display panel can be located on the rear, front or top
of the device, depending on the mounting configuration.
Figure 1: RUGGEDCOM RSG2300
1. Fiber or Copper Ethernet Ports 2. Copper Ethernet Port 3. Port Status Indicator LEDs 4. Mode Button 5. RS-232 Serial Console Port
(RJ45) 6. Display Mode Indicator LEDs 7. Alarm Indicator LED 8. Power Module Indicator LEDs
Communication Ports
Port Status Indicator LEDs
2
1
Ports for communicating with other devices or accessing the RUGGEDCOM ROS operating
system are described in
Port status indicator LEDs indicate the operational status of each port, dependent on the
currently selected mode.
2
Chapter 4, Communication Ports.
RUGGEDCOM RSG2300
Installation Guide
6
7
8
3 4 5
Description