Emerson EIM TEC2 500 Quick Start Manual page 8

Setting Position Limits for Manual Operation
September 2018
Setting Position Limits for
STEP 1: CLOSED Valve Position
1
LOCAL
Turn the selector knob to the LOCAL position. At the "CLOSE VALVE THEN SELECT STOP" prompt, depress the
declutch lever while rotating the handwheel until the clutch is fully engaged. Release the lever.
When the valve is fully closed. Return the selector knob to the STOP position.
At the "ACCEPT CLOSE LIMIT" prompt, select "YES."
Advance to the "SAVE CHANGES?" prompt and answer YES to save the changes.
6
Manual
2
Depress
declutch,
rotate
handwheel
until...
declutch is fully
engaged.
Operation
3
Release
STOP
declutch,
Setting Position Limits for Manual Operation
Quick-Start Guide
E2K-210-05-18 Rev. 3
4
5
YES