Emerson EIM TEC2 500 Quick Start Manual page 10

Check the Open/Closed Settings
September 2018
Check the Open/Closed Settings
Valve Closed
As you operate the valve in the close direction, verify
that the green LED is blinking. When fully closed is
reached, verify that the green LED stays ON and 0%
is displayed.
When turning to close,
1
green LED blinks.
When fully closed,
2
green LED remains lit.
Note
It is also configurable to have a red LED for
Valve Closed.
8
Valve Open
As you operate the valve in the open direction, verify
that the red LED is blinking. When fully open is
reached, verify that the red LED stays ON and 100%
is displayed.
When turning to
1
open, red LED blinks.
When fully open,
2
red LED remains lit.
Note
It is also configurable to have a green LED for
Valve Open.
Quick-Start Guide
E2K-210-05-18 Rev. 3
Check the Open/Closed Settings