Using Your Refrigerator; Setting The Controls; Changing The Control Settings - Whirlpool ED20F134RN0 Owner's Manual

Using Your Refrigerator
Setting the controls
All the controls for the unit are in the refrigerator.
When the unit is plugged in for the first time:
1. Turn the Thermostat Control to T (arrow).
2. Turn the Air Balance Control to T (arrow).
Give the refrigerator time to cool down completely
before adding food. (This may take at least 24
hours.)
These settings should be about right for normal
household refrigerator use.
Changing the control settings
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide.
l
Adjust the Thermostat Control first.
l
Wait at least 24 hours between adjustments.
. Then adjust the Air Balance Control if needed.
The controls will be set right when milk or juice is
as cold as you like and when ice cream is firm.
RECOMMENDED CONTROL SETTINGS:
CONDITION:
REASON: THERMOSTAT AIR BALANCE
If Refrigerator
Door opened often
Section is Large amount of food added
TOO WARM Room temperature too warm
5
If Freezer
Section is
TOO WARM
Door opened often
Large amount of food added
Very cold room temperature
(can't cycle often enough)
3
If Refrigerator
Section is
TOO COLD
Controls not set correctly
for your conditions
2
If ICE isn't
MADE FAST
ENOUGH
Heavy ice usage
Very cold room temperature
(can't cycle often enough)
3
If BOTH
SECTIONS
are TOO WARM
Door opened often
Large amount of food added
Very warm or very cold room
temperatures