Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Power Saving Control - Whirlpool ED26SS Use & Care Manual

No-frost
Hide thumbs Also See for ED26SS:
Table of Contents

Advertisement

Using your refrigerator
Setting the controls...
The Refrigerator
Control and the Freezer Control
are located
on the top inside of the right door When
the refrigerator
is first plugged
in. both of these con-
trols should be set in the middle. as shown above.
Give the refrigerator
time to cool down com-
pletely
before addlng
food.
(This may take 24
hours.)
Do not block the air outlet
near the lights. Block-
ing it can slow the air movement
needed
to keep
temperatures
at the level you set.
The Temperature
Display in the Performance
Con-
trol Package
on the front of the refrigerator
door will
show you when the refrigerator
and freezer are cool
enough for normal household refrigerator usage. (See
page
6 for more information.)
The controls will be set about
right when milk or
juice is as cold as you like and when ice cream is firm.
If adjustment
is needed, slide control slightly to
get the temperature
you want. (See "Changing
the control settings!')
Changing the control settings...
If you need to adjust temperatures
in the refrigerator
or freezer:
The Temperature
Display in the Performance
Con-
l
Move the sliding Temperature
Control Knob for that
trol Package
on the front of the refrigerator
will show
compartment
only a small amount
to change
its
the temperature
changes
in each compartment,
lt is
temperature.
normal for the temperatures
to get warmer when the
l
Wait at least 24 hours between
adjustments.
doors are opened
a lot or for long periods of time.
CONDITION:
If Refrigerator
Section
and/or Freezer Section
~~~~~~~~~~
is TOO WARM:
. ..call your
COOL-LINE?
If Refrigerator
Section
service
is TOO COLD:
assistance
telephone
If ice is not
number
MADE FAST ENOUGH:
Pw
19).
REASONS:
Door opened
often.
Large amount of food added.
Room temperature
is very cold.
[can't cycle often enough)
Control not set correctly
for your conditions.
Heavy ice usage.
Room temperature
is very cold.
(can't cycle often enough]
RECOMMENDED
SETTING CHANGE:
Slide the control for the
section that is TOO WARM
slightly
to the RIGHT
Slide the Refrigerator Con-
trol
slightly
to the LEFT
Slide the Freezer Control
slightly
to the RIGHT
Power Saving Control...
The Power Savlng Control,
on the right, inside re-
frigerator wall, operates
electric
heaters around the
door openings.
These heaters
help keep
moisture
from forming on the outside of the refrigerator,
1. Use the "OFF" setting when
,NL
cc,
humidity is low.
ru
R..
m
"Z
2.
Use the "ON" setting if mois-
ture forms on the outside of
t
lil
the refrigerator.
E:

Advertisement

Table of Contents
loading

Table of Contents