Advanced; Administrator; Router - Zte AT&T MF279 User Manual

Advanced

Administrator

This page allows you to change the default login (attadmin) that is used to access the AT&T Home Base
Manager.
Current Login: Enter the current login for the AT&T Home Base Manager in this field. The default login
is "attadmin."
New Login: Enter the new login, using only letters, numbers, and standard punctuation symbols. The
password must be at least four (4) characters long. The maximum length is 32 characters.
Verify New Login: Re-enter the new login in this field, then click "Apply."
Note: Once you change the default login, there is no way to retrieve the new login. You must reset the
AT&T Home Base to its factory settings to restore the login to the default login "attadmin." Remove the
bottom cover of your AT&T Home Base and using a ballpoint pen, press and hold the RESET button for
five (5) seconds.
Login Visibility: If this setting is enabled (On), the Login is readable on the screen. If disabled (Off), the
•••.
Login appears as

Router

32