Table of Contents
Advertisement
If you did not provide an email address for email notifications when you purchased your AT&T Home
Base, you can do so at att.com/myatt. Once you have logged on to your account, go to Profile and enter
a valid email address. You will receive email notifications when you are approaching your data plan limit
or if you have exceeded your data plan limit. If you have a limited voice plan, you will also receive
notifications as you are approaching your voice plan limit or if you have exceeded your voice plan limit.
You can also use the AT&T Home Base Manager to check your data plan usage and view data usage
notifications. On any device that is connected to your AT&T Home Base, enter
http://att.wirelessinternet directly into your browser address field. Log in using "attadmin" (or your
customized login). To check your data usage and the days remaining in your billing cycle, go to Data
Used. To view data usage notifications, go to Messages. The "i" light on your AT&T Home Base will blink
green when you have a new notification.
Note: Actual billed usage can be higher than the estimated data usage displayed in the usage meter.
Helpful Tips
Home Answering Machines
If you choose to use your home answering machine instead of the voicemail provided by your AT&T
Home Base, you will need to set your answering machine to pick up calls before network voicemail,
which is fewer than four (4) rings. If you have a standalone answering machine, you can connect it to the
"Phone 2" port on the back of your AT&T Home Base.
Alternatively, you can call AT&T Customer Service at 1-800-331-0500 to turn off the network voicemail
feature.
Adjusting Volume
Use your home phone's volume adjustment if available. Alternatively, the volume of the AT&T Home
Base can be adjusted. Six volume levels are available (level 1 to level 6) with the default setting at level 3.
While on a call, press ** to decrease volume or press ## to increase volume. Each time ** or ## is
pressed, the volume level is decreased or increased one volume level. To exit Volume Setting Mode,
press any other key or wait five (5) seconds.
Powering On/Off
The ON/OFF button is used to turn your AT&T Home Base on or off. When powered off, the AT&T Home
Base will no longer send or receive calls, but it will continue to charge the back-up battery if still
connected to the wall outlet.
To turn on your AT&T Home Base, slide the ON/OFF button to the ON position until the power light stays
solid green, if connected to a power supply (it will blink green if on back-up battery). To turn off your
19
Hide quick links:
Advertisement
Table of Contents
