Pan/Tilt Screen - Panasonic AW-UE150WP Operating Instructions Manual

Camera menu items (continued)
Crop H Position [0 to 1920]
Make settings for the position in the horizontal direction for the crop
frame specified in [Crop Adjust].
0 is the left edge and 1920 is the right edge.
This is only enabled when [UHD Crop] is set to [On].
Crop V Position [0 to 1080]
Make settings for the position in the vertical direction for the crop
frame specified in [Crop Adjust].
0 is the upper edge and 1080 is the lower edge.
This is only enabled when [UHD Crop] is set to [On].
Return
Return to the previous menu level.
The CROP function
„ „
When [UHD Crop] is set to [On], it is possible to output images with FHD
cropped from UHD signals from the 3G SDI OUT connector and IP.
(Image 2)
Video signals of UHD images down-converted to FHD are output to
the MONITOR OUT connector <MONI OUT> at this time, and the crop
frame is displayed. (Image 1)
Furthermore, UHD images are output from the 12G SDI OUT connector,
SFP+ 14G FIBER connector, and HDMI connector, and the crop frame
is not displayed.
Crop frame
Image 1
Depending on the [3G SDI/IP Out] and [Crop Out] settings, images
output from the 3G SDI OUT connector and IP will be as shown below.
Images output from 3G SDI OUT connector
3G SDI/IP Out Crop Out
Full – UHD images down-converted to FHD
Crop YL Yellow frame FHD crop images
G Green frame FHD crop images
MG Magenta frame FHD crop images
Depending on the [Crop Marker] setting, it is possible to select the crop
frame output to the MONITOR OUT connector <MONI OUT>.
Crop Marker
Off Crop frame is not displayed.
YL Only a yellow crop frame is displayed.
G Only a green crop frame is displayed.
MG Only a magenta crop frame is displayed.
YL+G Yellow and green crop frames are displayed.
YL+MG Yellow and magenta crop frames are displayed.
G+MG Green and magenta crop frames are displayed.
YL+G+MG Yellow, green, and magenta crop frames are displayed.
Image 2
and IP
Crop frame display

Pan/Tilt screen

P a n / T i l t
I n s t a l l P o s i t i o n
S m a r t P i c t u r e F l i p
F l i p D e t e c t A n g l e
P / T S p e e d M o d e
S p e e d W i t h Z o o m P o s i t i o n
F o c u s A d j u s t W i t h P T Z .
R e t u r n
Install Position [Desktop, Hanging]
[Desktop] or [Hanging] is selected here as the method used to install
the unit.
Desktop Stand-alone installation
Hanging Suspended installation
<NOTE>
• When [Hanging] has been selected, the top, bottom, left and right
of the images will be reversed, and up/down/left/right control for
panning and tilting will also be reversed.
Smart Picture Flip [Off, Auto]
When the tilt becomes the angle set for [Flip Detect Angle], the image
will be flipped in the vertical direction automatically.
Off The picture is not turned upside down.
Auto The picture is automatically turned upside down.
Flip Detect Angle [60deg to 120deg ]
Set the tilt angle at which the image will be flipped in the vertical
direction automatically when [Smart Picture Flip] is set to [Auto].
P/T Speed Mode [Normal, Fast]
Set the speed of pan/tilt operation.
Normal Pan/tilt operates at normal speed (maximum about 60° per
second).
Fast Pan/tilt operates at fast speed (maximum about 200° per
second).
<NOTE>
• The pan/tilt operation noise may increase when [Fast] is selected.
• Even when [Fast] is selected, the pan/tilt speed during preset
playback will be the same speed as when [Normal] is selected.
Speed With Zoom Position [Off, On]
[Off] or [On] is set here for the function used to adjust the pan-tilt
adjustment speed in conjunction with the zoom magnification.
When [On] is set, the panning and tilting operations will become
slower in the zoom status.
This function has no effect during preset operations.
Focus Adjust With PTZ. [Off, On]
[Off] or [On] is set here for the function which compensates for out-of-
focusing when it occurs during panning, tilting or zooming operations.
When [Off] is set, adjust the focus as required after zooming or set
[Focus Mode] to [Auto].
This is only enabled when [Manual] has been selected as the [Focus
Mode] setting.
Return
Return to the previous menu level.
60
D e s k t o p
O f f
9 0 d e g
N o r m a l
O n
O f f