Camera Menu Items; Setting The Camera Menu Items; Top Menu Screen - Panasonic AW-UE150WP Operating Instructions Manual

Camera menu items

Setting the camera menu items

Camera menus are displayed on the monitor when the unit's settings are
to be selected.
The monitor is connected to the MONITOR OUT connector <MONI
OUT>.
The basic camera menu operations involve displaying sub-menus from
the Top Menu items, and selecting settings on the sub-menus.
Some sub-menus have menu items for performing more detailed
settings.
For details on the "Basic setup operations" to display the camera
menus and change the items using the controller (AW-RP150), refer to
page 41.
The "
" and " " marks in the menu titles indicate the hierarchical level
of the menu currently displayed.
For instance, "
whereas "
that the second hierarchical level is now displayed.
Menu items accompanied by a "
on a scene by scene basis; menu items accompanied by a "
indicate data which is stored together for one camera regardless of the
scenes.
For details on factory default settings, see "Camera menu item table"
(→ page 66).
" indicates the first hierarchical level
" and " " indicate
" mark indicate data which is stored
" mark

Top Menu screen

T o p M e n u
C a m e r a
S y s t e m
O u t p u t
P a n / T i l t
P r e s e t
M a i n t e n a n c e
Camera
Select this to open the camera menu relating to the camera images.
System
Select this to display the System menu used to set up system format
of the camera or adjust the genlock (external synchronization) phase
or establish the camera output image settings.
Output
Select this to display the Output menu used for setting video/audio
output for the camera, OSD output, etc.
Pan/Tilt
Select this to display the Pan/Tilt menu used for various pan/tilt
operations.
Preset
Select this to display the Preset menu used for various preset playback
operations.
Maintenance
Select this to display the Maintenance menu used to check the
camera's firmware version or initialize its settings.
<NOTE>
• The Top Menu does not have a [Return].
To close the menu screen, use the controller to perform the operation
to close the menu screen. For further details, refer to "Basic setup
operations" (→ page 41).
42