Brightness 2/2 Screen - Panasonic AW-UE150WP Operating Instructions Manual

Camera menu items (continued)
Shutter Mode [Off, Step, Synchro, ELC]
Select for camera shutter mode.
Off The shutter is set to OFF.
Step The step shutter is set (the steps can be changed).
Synchro The synchro shutter is set (the setting can be changed
continuously).
ELC The electronic shutter is controlled and the light quantity
is adjusted automatically.
Step/Synchro
This is used to adjust the shutter speed in the mode which was
selected as the [Shutter Mode] setting.
When a higher shutter speed is selected, fast-moving subjects do not
become blurred easily but the images will be darker.
The shutter speeds that can be set are listed below.
When [Step] is
selected as the
[Shutter Mode]
59.94p/59.94i 1/60, 1/100, 1/120,
mode 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000,
1/10000
29.97p mode 1/30, 1/60, 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000,
1/10000
23.98p/24p 1/24, 1/48, 1/60, 1/100,
mode 1/120, 1/250, 1/500,
1/1000, 1 /2000, 1/4000,
1/8000, 1/10000
50p/50i mode 1/60, 1/100, 1/120,
1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/8000,
1/10000
25p mode 1/25, 1/50, 1/60, 1/100,
1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000,
1/8000, 1/10000
<NOTE>
• When [Shutter Mode] is set to [Off] in 29.97p, 23.98p, or 25p mode,
the shutter speed is set to [1/50].
ELC Limit [1/100, 1/120, 1/250]
Set the maximum shutter level when ELC is operating.
Return
Return to the previous menu level.

Brightness 2/2 screen

Gain [When Super Gain is Off: Auto, 0dB to 36dB,
When [Synchro]
When Super Gain is On: Auto, 0dB to 42dB]
is selected as the
The image gain is adjusted here.
[Shutter Mode]
In locations which are too dark, adjust the gain upward; conversely, in
60.0 Hz to 7200 Hz
locations which are too bright, adjust it downward.
When [Auto] is set, the light quantity is adjusted automatically.
The noise increases when the gain is increased.
<NOTE>
30.0 Hz to 7200 Hz
• [Gain] cannot be set to [Auto] when [Frame Mix] is set to [18dB] or
Super Gain [Off, On]
24.0 Hz to 7200 Hz
Set the super gain (increased sensitivity) mode.
50.0 Hz to 7200 Hz
AGC Max Gain [6dB, 12dB, 18dB]
When [Auto] is selected as the [Gain] setting, the maximum gain-up
amount can be set.
25.0 Hz to 7200 Hz
Frame Mix [Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage) amount.
When frame addition is performed, it will appear as if the images are
missing some frames.
This cannot be configured when the format is 2160/29.97p,
2160/23.98p, 2160/24p, 2160/25p, 1080/29.97p, 1080/23.98p(59.94i),
1080/29.97PsF, 1080/23.98PsF, 1080/25p or 1080/25PsF.
[Frame Mix] cannot be set to [18dB] or [24dB] when [Iris Mode],
[Gain], or [Focus Mode] is set to [Auto]. (When setting [Frame Mix] to
[18dB] or [24dB], set [Iris Mode] and [Focus Mode] to [Manual] and
set [Gain] to any setting other than [Auto].)
<NOTE>
• Under discharge tube illumination, such as fluorescent and mercury-
44
B r i g h t n e s s 2 / 2
G a i n
S u p e r G a i n
A G C M a x G a i n
F r a m e M i x
N D F i l t e r
D a y / N i g h t
R e t u r n
[24dB].
Off Do not set super gain mode.
On Set super gain mode.
vapor lights, the brightness may change synchronously, colors may
change, and horizontal stripes may flow up and down the image.
In such cases, we recommend setting the electronic shutter speed
to 1/100 in regions with 50 Hz power supply frequency, and to OFF
in regions with 60 Hz power supply frequency.
0 d B
O f f
1 8 d B
O f f
T h r o u g h
D a y