Panasonic AW-UE150WP Operating Instructions Manual page 136

Troubleshooting (continued)
Symptom
The settings on the web setting
screen [Setup] are not updated or
displayed properly
It is not possible to download the
setting files
The tally lamps do not light
Status display lamp does not light
Commands from the personal
computer, external devices, and
remote controller are unstable
The authentication screen appears
repeatedly
For Windows:
• Press the [F5] key on the keyboard of the personal computer to request that the
settings be acquired.
For Mac:
• Press the [Command] + [R] key on the personal computer's keyboard to request
that the settings be acquired.
• Perform the following to delete the temporary Internet files.
For Windows:
A Select [Tools] - [Internet Options] in Internet Explorer.
B Click the [General] tab, and click the [Delete] button under [Browsing history].
C In the [Delete Browsing History] screen, select the [Temporary Internet Files]
checkbox, and then click [Delete].
D Click the [OK] button.
For Mac:
A Select [Safari] - [Empty Cache] in Safari.
B Click [Empty] in the [Are you sure you want to empty the cache?] pop-up screen.
For Windows:
• If [Check for newer versions of stored pages] is not set to [Every time I visit the
webpage] in the temporary Internet file settings, IP images may not appear in the
web setting screen.
→ Perform the following.
A Select [Tools] - [Internet Options] in Internet Explorer.
B Click the [General] tab, and click the [Settings] button under [Browsing history].
C In the [Temporary Internet Files and History Settings] dialog box, select the
[Every time I visit the webpage] option under [Check for newer versions of
stored pages].
D Click the [OK] button.
• The unit's ports may be filtered by the firewall or other function of the anti‑virus
software.
→ Change the HTTP port number of the unit to a port number that will not be filtered.
For Windows:
• Has the file download function been disabled?
→ Perform the following.
A Select [Tools] - [Internet Options] in Internet Explorer.
B Click the [Security] tab, and click the [Custom level] button under [Security level
for this zone].
C In the [Security Settings] dialog box, select the [Enable] option for [File
download].
D Click the [OK] button.
E Click the [OK] button.
• Is the [Tally] setting set to [Disable]?
→ If [Tally] is set to [Disable], the unit's tally lamp does not light. Change the setting to
[Enable].
• Is the [Status Lamp] setting set to [Disable]?
→ If [Status Lamp] is set to [Disable], the status display lamp does not light when this
unit is working properly. Change the setting to [Enable].
• Are two or more Android terminals connected?
→ Only one Android terminal can be connected to the unit.
• Has the user name or password been changed?
→ If you change the user name and password of the user currently logged in from a
separate web browser while the unit is being accessed, the authentication screen
appears each time the screen display is changed. Close the web browser, and
initiate access to the unit again.
• Has the method for user authentication been changed?
→ If you change the [User auth.] - [Authentication] setting, close the web browser and
initiate access again.
136
Cause and solution Reference pages
– – –
– – –
– – –
– – –
– – –
page 59, page 89
page 59, page 89
– – –
page 107, page 108
page 107