Preset 2/2 Screen; Maintenance Screen - Panasonic AW-UE150WP Operating Instructions Manual

Camera menu items (continued)

Preset 2/2 screen

P r e s e t 2 /2
P r e s e t Z oom Mod e
F r e e z e D uri ng P reset
R e t u r n
Preset Zoom Mode [Mode A, Mode B]
Select the zoom operation for when preset memory is recalled.
Mode A Perform the zoom operation in line with the pan/tilt
operation.
Mode B Perform the zoom operation quicker than the pan/tilt
operation.
Freeze During Preset [Off, On]
Turn the function for freezing images during preset playback off/on.
When this is set to [On], preset playback is performed with a still of
the image immediately preceding the start of preset playback being
output. The image freeze is released when preset playback is finished.
Return
Return to the previous menu level.

Maintenance screen

Mode A
Off
Firmware Version
This is selected to display the [Firmware Version] screen on which the
user can check the version of the firmware which is currently installed
in the unit.
IP Network
This is selected to display the [IP Network] screen on which the user
can check the [IP Address], [Subnet Mask] and [Default Gateway]
settings which have been established in the unit.
Initialize
This is selected to display the [Initialize] screen on which the user can
initialize the camera settings.
For details on operation, refer to "Concerning initialization"
(→ page 64).
Hour Meter
This is selected to display the [Hour Meter] screen on which the
operation history is displayed.
Error Status
Display the [Error Status] screen that displays the status of errors.
Return
Return to the previous menu level.
62
M a i n t e n a n c e
F i r m w a r e V e r s i o n
I P N e t w o r k
I n i t i a l i z e
H o u r M e t e r
E r r o r S t a t u s
R e t u r n