Panasonic AW-UE150WP Operating Instructions Manual page 87

Web screen configurations (continued)
z Genlock
„
This item's setting is reflected immediately.
Horizontal Phase
This is used to adjust the horizontal phase during genlock.
Setting range: –206 to +49
Factory settings: 0
<NOTE>
• The horizontal phases of the HD and SD signals cannot be adjusted
separately.
Neither is it possible to adjust the chroma phase of the VIDEO OUT
signals. The free run setting is used.
z Output 1/3
„
This item's setting is reflected when the [Set] button is pressed.
Format
The video format is changed on this screen.
For [480/59.94p(i)] and [576/50p(i)], P signals are output for HDMI,
while I signals are output for SDI and video outputs.
Setting value:
For 59.94Hz:
1080/59.94p, 1080/29.97p, 1080/23.98p, 1080/59.94i,
1080/29.97PsF, 1080/23.98PsF, 720/59.94p, 480/59.94p(i)
For 50Hz:
1080/50p, 1080/25p, 1080/50i, 180/25PsF, 720/50p, 576/50p(i)
Factory settings: 1080/59.94i (AW-UE150WP/AW-UE150KP)
1080/50i (AW-UE150WE/AW-UE150KE)
<NOTE>
• When you switch from an HD format to an SD format or vice versa,
the unit automatically restarts after the Format Set screen appears.
z Output 2/3
„
This item's setting is reflected when the [Set] button is pressed.
Frequency
This item is selected to switch the frame frequency.
Setting value: 59.94Hz/50Hz
• When the frequency is switched, [Format] is set as follows.
59.94Hz
1080/59.94p
1080/29.97p
1080/23.98p
1080/59.94i
1080/29.97PsF
1080/23.98PsF
720/59.94p
480/59.94p(i)
Factory settings: 59.94Hz (AW-UE150WP/AW-UE150KP)
50Hz (AW-UE150WE/AW-UE150KE)
z Output 3/3
„
This item's setting is reflected when the [Set] button is pressed.
Down CONV. Mode
The down-conversion mode is selected here.
Setting value:
Use this when the aspect ratio of the monitor is 16:9. When
the 4:3 aspect ratio has been set for the monitor screen, the
images are squeezed horizontally and extended vertically
changing the view of the angle.
Squeeze
Use this when the aspect ratio of the monitor is 4:3. With
the vertical height serving as the reference, the parts which
extend beyond this at the two sides are cropped changing
the view of the angle.
SideCut
Use this when the aspect ratio of the monitor is 4:3. With the
horizontal width serving as the reference, black bands are
added at the top and bottom changing the view of the angle.
LetterBox
Factory settings: Squeeze
Color Bars Setup
This is only enabled when [Frequency] is set to [59.94Hz].
Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for the
VIDEO OUT signal.
Setting value:
Off 0.0IRE
On 7.5IRE
Factory settings: Off
87
50Hz
1080/50p

1080/25p

1080/25p

1080/50i

1080/25PsF

1080/25PsF

720/50p

576/50p(i)
