Panasonic AW-UE150WP Operating Instructions Manual page 141

Troubleshooting (continued)
Symptom
The images are distorted
The images darken when the mobile
terminal is not operated for a certain
period
When multiple web browsers are
running to display H.264 images,
images from multiple cameras
appear sequentially in a single web
browser
Images are not displayed for NDI|HX‑
compatible switchers
Audio is not output for NDI|HX‑
compatible switchers
• The images may be distorted if the transmission path is congested and proper
transmission is not possible.
→ Consult your network administrator.
• The images may be distorted if video packet shuffling occurs on the
transmission path.
→ Switching to an identical Internet service provider for both the camera and the
personal computer may prevent this problem. Consult your network administrator.
• Is the power‑saving mode of the mobile terminal enabled?
→ Disable the power-saving mode of the mobile terminal to allow the images to be
displayed indefinitely.
For Windows:
• This may occur depending on the combination of the personal computer's
display adaptor and the driver.
→ If this occurs, update the first display adaptor to the latest version.
If this does not resolve the problem, adjust the hardware accelerator functon as
follows.
This section describes the procedure for Windows 7 as an example. Changing the
settings may not be possible, depending on your environment.
A Right-click on the desktop, and select [Screen Resolution] from the menu.
B Click [Advanced settings].
C Select the [Troubleshoot] tab, and click [Change setting].
D If the [User Account Control] dialog box appears, click [Yes]. (When logged on
with an account other than an administrator account, enter the password (and
user name if necessary), and click [Yes].)
E Change to [Hardware acceleration] setting to [None] at the far left, and click [OK].
• The setting values in the [Video over IP] IP video settings screen may have been
changed.
→ Set [Parameter Setting] > [Parameter] to [NDI|HX] to reset the setting values in
[Video over IP].
• The [RTSP] > [RTSP port] and [RTSP Request URL (1)] to [RTSP Request URL
(4)] setting values in the [Advanced] advanced network setting screen may have
been changed.
→ Reset the settings to their factory default values.
• [User auth.] may be set to [On] in the [User auth.] user authentication screen.
→ Reset the setting to [Off].
• [Audio] may be set to [Off] in the [Audio] audio screen.
→ Reset the setting to [On].
141
Cause and solution Reference pages
– – –
– – –
– – –
– – –
pages 92 to 94
page 115
page 107
page 96