Maintenance - Sharp XR-1X Operation Manual

Maintenance

Cleaning the projector
■ Be sure to unplug the power cord before
cleaning the projector.
■ The cabinet as well as the operation panel is
made of plastic. Avoid using benzene or
thinner, as these can damage the finish on the
cabinet.
■ Do not use volatile agents such as insecticides
on the projector.
Do not attach rubber or plastic items to the
projector for long periods.
The effects of some of the agents in the plastic
may cause damage to the quality or finish of the
projector.
Thinner
Wax
■ Wipe off dirt gently with a soft flannel cloth.
■ When the dirt is hard to remove, soak a cloth in
a mild detergent diluted with water, wring the
cloth well and then wipe the projector.
Strong cleaning detergents may discolor, warp
or damage the coating on the projector. Make
sure to test on a small, inconspicuous area on
the projector before use.
52
Cleaning the lens
■ Use a commercially available blower or lens
■ As the surface of the lens can easily get
Cleaning the exhaust and intake vents
■ Use a vacuum cleaner to clean dust from the
Mild detergent diluted
with water
cleaning paper (for glasses and camera lenses)
for cleaning the lens. Do not use any liquid type
cleaning agents, as they may wear off the
coating film on the surface of the lens.
damaged, be sure not to scrape or hit the lens.
exhaust vent and the intake vent.