Troubleshooting With "Help" Menu; Displaying "Help" Menu Screen - Sharp XR-1X Operation Manual

Troubleshooting with "Help" menu

This function advises you to solve the problems during usage.

Displaying "Help" menu screen

Example: When image flickering appears
Operation to solve image flickering when pro-
jecting the computer RGB signal.
1
Press BMENU/HELP.
2
Press O or Q to select "Help", then
press IENTER.
Picture SCR - ADJ
There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settings
SEL. ENTER
3
Press P or R to select "Vertical
stripes or flickering image ap-
pears" on Help menu, then press
IENTER.
Vertical stripes or flickering image appear
Initiate "Auto Sync" Adjustments.
If there is no change after performing "Auto Sync"
adjustments, adjust the following items.
Adjust vertical noise
Adjust horizontal noise
Reset the 2 items above
Return
Cur. sig. freq: H 43 kHz / V 60 Hz
SEL. ENTER
4
5
PRJ - ADJ Help
6
END
• You can adjust the items with check marks (✔).
• Some items in the Help menu may not appear,
depending on the projected image.
• If the problem is not solved, refer to
"Troubleshooting". (see pages
Help
END
MENU/HELP
button
Adjuatment button
(P/R/O/Q)
ENTER button
Select "Initiate "Auto Sync" Ad-
justments", then press IENTER.
If the image is not improved, se-
lect "Adjust horizontal noise.",
then press IENTER.
Press O or Q to adjust.
Phase 0
SEL./ADJ. Rtn. Menu
Note
Help
END
60 and 61)
51