Specifications - Sharp XR-1X Operation Manual

Specifications

Product type Projector
Model XR-1X / XR-1S
Video system NTSC3.58/NTSC4.43/PAL/PAL-M/PAL-N/PAL-60/SECAM/DTV480I/DTV480P/
DTV540P/DTV576I/DTV576P/DTV720P/DTV1035I/DTV1080I/DTV1080I-50
Display method Single Chip Digital Micromirror Device
Panel size: [XR-1X] 0.7" (17.5 mm) (10.5 [H] × 14.0 [W] mm), 1 chip XGA DMD
DMD panel
No. of dots: [XR-1X] 786,432 dots (1,024 [H] × 768 [V])
[XR-1X] 1–1.16 × zoom lens, F2.80–3.10, f = 25.8–30.0 mm
Lens
[XR-1S] 1–1.16 × zoom lens, F2.60–2.84, f = 19.3–22.6 mm
Projection lamp 150 W DC lamp
Component input signal 15-pin mini D-sub connector
Y: 1.0 Vp-p, sync negative, 75 Ω terminated
(INPUT1)
P
B
P
R
Horizontal resolution [XR-1X] 700 TV lines (DTV720P)
[XR-1S] 520 TV lines (DTV720P)
Computer RGB input 15-pin mini D-sub connector
RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75 Ω terminated
signal (INPUT 1)
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
S-video input signal 4-pin mini DIN connector
Y (luminance signal): 1.0 Vp-p, sync negative, 75 Ω terminated
(INPUT 2)
C (chrominance signal): Burst 0.286 Vp-p, 75 Ω terminated
RCA connector: VIDEO, composite video, 1.0 Vp-p, sync negative, 75 Ω
Video input signal
(INPUT 3) terminated
Pixel clock 12–108 MHz
Vertical frequency 45–85 Hz
Horizontal frequency 15–70 kHz
Audio input signal ø3.5 mm minijack: AUDIO, 0.5 Vrms, more than 22 kΩ (stereo)
2.8 cm round × 1
Speaker system
Rated voltage AC 100–240 V
Input current 2.0 A
Rated frequency 50/60 Hz
Power consumption 195 W (Standard mode)/177 W (Eco/Quiet mode "On") with AC 100 V
190 W (Standard mode)/167 W (Eco/Quiet mode "On") with AC 240 V
Power consumption (standby) 4 W (AC 100 V) – 5 W (AC 240 V)
Heat dissipation 730 BTU/hour (Standard mode)/660 BTU/hour (Eco/Quiet mode "On") with AC 100 V
710 BTU/hour (Standard mode)/630 BTU/hour (Eco/Quiet mode "On") with AC 240 V
Operating temperature 41°F to 95°F (+5°C to +35°C)
Storage temperature –4°F to 140°F (–20°C to +60°C)
Cabinet Plastic
I/R carrier frequency 38 kHz
47
Dimensions (approx.) 9
9 47
foot and projecting parts)
Weight (approx.) 3.20 lbs. (1.45 kg)
Supplied accessories Remote control, Lithium battery, Power cord for U.S., Canada etc. (6', 1.8 m),
Power cord for Europe, except U.K. (6', 1.8 m), Power cord for U.K., Hong Kong
and Singapore (6', 1.8 m), Power cord for Australia, New Zealand and Oceania
(6', 1.8 m), RGB/USB cable (6', 1.8 m), Cable tie × 2, Soft case, Projector
manual CD-ROM, Operation manual
Replacement parts Lamp
(RRMCGA256WJSA), Lithium battery, Power cord for U.S., Canada etc.
(QACCDA029WJPZ), Power cord for Europe, except U.K. (QACCVA006WJPZ),
Power cord for U.K., Hong Kong and Singapore (QACCBA015WJPZ), Power
cord for Australia, New Zealand and Oceania (QACCLA024WJPZ), RGB/USB
cable (QCNWGA047WJPZ), Cable tie (UBNDTA015WJZZ), Soft case
(GCASNA011WJZZ), Projector manual CD-ROM (UDSKAA045WJN1), Opera-
tion manual (TINS-B148WJN1)
As a part of policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
[XR-1S] 0.55" (13.7 mm) (8.2 [H] × 10.9 [W] mm), 1 chip SVGA DMD
[XR-1S] 480,000 dots (800 [H] × 600 [V])
: 0.7 Vp-p, 75 Ω terminated
: 0.7 Vp-p, 75 Ω terminated
" × 2 " × 4 " (247 (W) × 64 (H) × 122 (D) mm) (main body only)
17 13
/ / /
64 32 16
" × 2 " × 4 " (247 (W) × 69 (H) × 122 (D) mm) (including adjustment
/ 23 / 13 /
64 32 16
unit (Lamp/cage module)
TM (DMD TM ) by Texas Instruments
(AN-XR1LP), Remote control
63