Inserting The Lithium Battery; Projector - Sharp XR-1X Operation Manual

Part Names and Functions (Continued)
Z
Numbers in refer to the main pages in this operation manual where the topic is explained.
ON/STANDBY button
For turning the power
on and putting the
projector into standby
mode.
INPUT 1, 2, and 3
buttons
For switching to the
respective input
modes.
AUTO SYNC button
For automatically
adjusting images when
connected to a com-
puter.
RESIZE button
For switching the
screen size (NORMAL,
BORDER, etc.).
PICTURE MODE
buttons
For switching the
picture mode.
Volume buttons
For adjusting the
speaker sound level.
Note
• All the buttons on the remote control, except
the MOUSE/Adjustment button, are made of
luminous rubber, that is visible in the dark. (The
luminous light weakens over time.)

Inserting the Lithium Battery

1
While pressing the tab (1), pull the battery holder
(2).
2
Pull the battery holder.
3
Insert the supplied lithium battery (CR2025).
• Insert the lithium battery with the + side of the battery facing the
+ mark of the battery holder.
4
Insert the battery holder into the remote control.
14
26
29
32
30
32
29
MENU/HELP button
36
For displaying adjustment
51
and setting screens, and
help screen.
MOUSE/Adjustment
33
buttons (P/R/O/Q)
36
• For moving the computer
cursor when connecting
the projector USB terminal
to the computer with RGB/
USB cable.
• For selecting menu items.
L CLICK/ENTER button
33
• For the Left click when
36
connecting the projector
USB terminal to the
computer with RGB/USB
cable.
• For setting items selected
or adjusted on the menu.
R CLICK/RETURN button
33
• For the Right click when
36
connecting the projector
USB terminal to the
computer with RGB/USB
cable.
• For undoing an operation
or returning to the previous
display.
32 FREEZE button
For freezing images.
AV MUTE button
29
For temporarily display-
ing the black screen and
turning off the sound.
+ mark